User manual KENWOOD KDS-P900

[. . . ] · If you experience problems during installation, consult your Kenwood dealer. · When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. · Characters that conform to ISO 8859-1 can be displayed. · The RDS feature won't work where the service is not supported by any broadcasting station. [. . . ] - Cabin selection (page 29) - Speaker Setting (page 29) - DTA (Digital Time Alignment) setting (page 30) - X'Over setting (page 30) - Manual Equalizer Control (page 31) - Preset position selection (page 32) - Manual position setting (page 32) 1 Select the source Press the [SRC] button. 2 Enter Audio preset recall mode Select "SOUND" > "Preset" > "Recall". For how to select Function Control items, refer to <Function Control> (page 6). 3 Select the number to recall in the memory Turn the Control knob and push the center when the desired number is displayed. 2 Enter Audio preset memory mode Select "SOUND" > "Preset" > "Memory". For how to select Function Control items, refer to <Function Control> (page 6). 4 Turn the Control knob to select "YES", and then press the Control knob. "Recall Completed" is displayed. 3 Select the number to put in the memory Turn the Control knob and push the center when the desired number is displayed. 5 Exit Audio preset recall mode Press the [FNC] button. 4 Turn the Control knob to select "YES", and then press the Control knob. "Memory Completed" is displayed. / · The "User" of <Preset Equalizer curve select> (page 31) is changed to the value which was recalled. · The Equalizer curve is changed to the value which was recalled by the selected source. 5 Exit Audio preset memory mode Press the [FNC] button. / · Register 6 pairs of Audio Preset Memory. · Number "1": When you press the Reset, all the sources will be the setting value which is registered. · Number "1" and "2": The memory cannot be erased by the Reset button. · This function cannot be registered when the iPod Equalizer set in <Preset Equalizer curve select> (page 31). English | 33 Favorite Control Favorite Preset Memory Registering the operation procedure to select your favorite broadcast station or iPod Playlists/ Artists, etc. Favorite Preset Recall Retrieving an item registered to Favorite. 1 Enter Favorite Preset Recall mode Turn the Control knob. 1 Display a favorite item Source TUNER/SIRIUS/XM/HD iPod Hands-free phone Registerable items Preset Memory List selection screen for Playlists/ Artists/ Albums, etc. Telephone number retrieval. 2 Select the number to recall in the Favorite memory Turn the Control knob. 3 Recall the Favorite Preset Press the Control knob. " FAV " is displayed when the operation procedure can be registered. iPod setting The desired list in the first hierarchy can be registered. 1st hierarchy iPod PLAYLISTS ARTISTS ALBUMS ALL ARTISTS ARTISTS 1 ARTISTS 2 ARTISTS 3 COMPOSERS AUDIOBOOKS ALL ALBUMS ALBUM 1 ALBUM 2 ALBUM 3 Cancelling the Favorite Preset Recall mode Turn the Control knob to select "Return", and then press the Control knob. 2nd hierarchy 3rd hierarchy / · When iPod is selected for the source, the list selection screen for Playlists/ Artists/ Albums, etc. For how to select Function Control item, refer to <Function Control> (page 6). 4 By operating the Bluetooth device, start handsfree connection. When registering from this unit 2 Enter Special device registration mode Press the Control knob for at least 1 second. A list is displayed. 1 Select Bluetooth device registration mode Select "MENU" > "Device Regist". For how to select Function Control item, refer to <Function Control> (page 6). 3 Select a device name Turn the Control knob and push the center when the desired device name is displayed. If "Completed" is displayed, registration is completed. 2 Enter Bluetooth device registration mode Press the Control knob for at least 1 second. When search is completed, "Finished" is displayed. 4 Go through the procedure of <Registering Bluetooth device> (page 36) and complete the registration (pairing). 3 Select the Bluetooth device Turn the Control knob and push the center when the desired Bluetooth device is displayed. Cancelling Special device registration mode Press the [FNC] button for at least 1 second. 4 Input the PIN code Operation type Select the numbers. Operation Turn the Control knob or push it towards up or down. Push the Control knob towards left. / · If the device name is not in the list, select "Other Phones". Registering PIN Code By operating the Bluetooth device, specify the PIN code necessary for registering this unit. 5 Transmit the PIN code Press the Control knob for at least 1 second. If "Pairing Success" is displayed, registration is completed. 1 Select PIN code edit mode Select "MENU" > "PIN Code Edit". For how to select Function Control item, refer to <Function Control> (page 6). 6 Return to the device list Press the Control knob. 7 Exit Bluetooth device registration mode 2 Enter PIN code edit mode 36 | KDS-P900/ KDC-HD942U/ KDC-X693/ KDC-MP642U Press the Control knob for at least 1 second. The current setting of PIN code is displayed. 3 By operating the cell-phone, start the handsfree connection. 3 Input the PIN code Operation type Select the numbers. Operation Turn the Control knob or push it towards up or down. [. . . ] Pairing error. HF Error 68: Un Known: Device Full: PIN Code NG: Connect NG: Pairing Failed: Err No Matching: The voice tag is wrong. Voice cannot be recognized because of an unregistered voice tag, etc. Too Soft: Too Loud: Voice is too small and cannot be recognized. Voice is too large to be recognized. 56 | KDS-P900/ KDC-HD942U/ KDC-X693/ KDC-MP642U Specifications FM tuner section Frequency range (200 kHz space) : 87. 9 MHz ­ 107. 9 MHz Usable sensitivity (S/N = 30dB) : 9. 3dBf (0. 8 V/75 ) Quieting Sensitivity (S/N = 50dB) : 15. 2dBf (1. 6 V/75 ) Frequency response (±3 dB) : 30 Hz ­ 15 kHz Signal to Noise ratio (MONO) : 70 dB Selectivity (±400 kHz) : 80 dB Stereo separation (1 kHz) : 40 dB Bluetooth section (KDS-P900) Version : Bluetooth Ver. [. . . ]