User manual KENWOOD KMD-71

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. 2CAUTION To prevent damage to the machine, take the following precautions: · Make sure to ground the unit to a negative 12V DC power supply. [. . . ] Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. "LOAD" is displayed when discs are being exchanged on the disc changer. Switching Display for Discs Switch the display that appears whilst discs are playing. Switching Display for Discs: Each time you press the DISP button or CLK button, the display during disc play switches as follows: · During vertical division mode display Upper part display Lower part display DISP button CLK button Track Time DNPS Disc Title Track Title DNPS Disc Title Track Title Spectrum Analyzer1 Spectrum Analyzer2 + Clock Spectrum Analyzer2 + Graphic Graphic + Clock Date NOTE Disc Search (Function of disc changers) Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. · The same items cannot be selected for both the upper part and the lower part. · When the Black Mask function is turned on, the lower part display shows the clock only. -- 24 -- · During horizontal division mode Left side display Right side display CLK button DISP button Graphic Spectrum Analyzer1 Spectrum Analyzer2 Spectrum Analyzer3 Analog clock Digital clock NOTE Track number Track Time DNPS Track Time Track number DNPS This function cannot be operated whilst the Black Mask function is on. · During the full-screen display mode The display is switched each time the CLK button is pressed. NOTE For information regarding the display items, refer to "Switching Display" (page 12). NOTE · DNPS : function of disc changers. · You can give names to discs through the presetting disc name function (page. 28). The display of the disc and track numbers change continuously as the next track is being selected. When the disc/track has been selected, play starts. The selected disc/track number blinks in the display as it is being played. NOTE When the disc or track to be played changes, the title is displayed in one scrolling display. 2 Press the DISP or CLK button to display the disc title or track title at the upper part of the display. 3 Holding down the DISP button for one second or more results in one scrolling display of the titles. NOTE Please see the menu settings (page 38) about switching between manual scrolling and automatic scrolling. This function is not available with the following models: KDC-C200/C300/C400/C301/C401 2 To change the track being heard, press the ¢ button. Another disc/track is selected and played. NOTE · Magazine random play is cancelled when you eject the disc. · The time needed for random selection depends on the number of discs loaded in the disc magazine. Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. The scrolling method differs depending on the setting of scrolling in the menu. To scroll manually: -- 27 -- MD/External disc control features Presetting Disc Names(DNPS) (Function of disc changers) Store the names of discs to be displayed when played. 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. · When the display mode selection is full-screen display and disc title or track title is displayed at the upper part of the vertical division screen, the disc name preset function cannot be used. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, +, ­, *, =, <, >, [ and ]. English 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to 10 characters for each name. 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. [. . . ] Press the reset button on the unit (see page 4). There is noise during playback. Track repeat, disc repeat, track scan, disc scan, random play, and magazine random play start by themselves. The disc control mode cannot be selected. The specified disc does not play, but another one plays instead. The MD is soiled with dust or dirt. [. . . ]