User manual KENWOOD KMM-203

[. . . ] Indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 21-Sep-16 11:57:22 AM CONTENTS BEFORE USE BASICS GETTING STARTED 2 3 4 BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe Warning and Caution in this manual. € Please keep the manual in a safe and accessible place for future reference. 1 Select the display language and cancel the demonstration 2 Set the clock and date 3 Set the initial settings WARNING • Do not operate any function that takes your attention away from safe driving. [. . . ] Repeat step 2 until the desired item is selected or activated. (or using the remote control) To return to the previous setting item, press 1 Press AUD to enter [AUDIO CONTROL]. Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust. (Select [USER] to use the settings made in [EQ PRO]. ) [DRIVE EQ] is a preset equalizer that reduces noise outside the car or running noise of the tyres. LV1/LV2: Selects your preferred low and high frequencies boost to produce a well-balanced sound at a low volume level. THROUGH: All signals are sent to the subwoofer.  ; 85HZ/120HZ/160HZ: Audio signals with frequencies lower than 85 Hz/120 Hz/160 Hz are sent to the subwoofer. REVERSE (180°)/NORMAL (0°): Selects the phase of the subwoofer output to be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUBWOOFER]. ) R15 to F15 (0): Adjusts the rear and front speaker output balance. l15 to R15 (0): Adjusts the left and right speaker output balance. For AUX: –8 to +8 (0) ; For other sources: –8 to 0: Preset the initial volume level of each source. (Before adjustment, select the source you want to adjust. ) DISPLAY SETTINGS Set the dimmer Press and hold DISP (DIMMER) to turn on or off the dimmer. € If you have set [DIMMER TIME], it will be canceled once you press and hold this button. BASS BOOST LOUDNESS SUBWOOFER SET LPF SUBWOOFER Other settings 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select an item (see the following table), then press the knob. 3 Repeat step 2 until the desired item is selected/activated or 4 Press and hold follow the instructions stated on the selected item. DIMMER TIME: Set the dimmer on and off time. 1 Turn the volume knob to adjust the [ON] time, then press the knob. [. . . ] To return to the previous setting item, press . eNGLISH 19 JS_KWD_KMM_203_MN_EN_4. Indd 19 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 21-Sep-16 11:49:37 AM iHeartRadio® (for ) • “Made for iPod, ” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. [. . . ]