User manual KENWOOD KMM-261

[. . . ] KMM-361SD KMM-261 KMM-100GY DIGITAL MEDIA RECEIVER KMM-100AY KMM-100RY KMM-120Y INSTRUCTION MANUAL ЦИФРОВОЙ МЕДИА-РЕСИВЕР ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ ЦИФРОВИЙ МЕДІА-РЕСИВЕР ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ © 2013 JVC KENWOOD Corporation GET0957-001A (EN) EN_KMM_361SD_001A_EN_f. indd 1 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 9/10/2013 12:05:42 PM Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. [. . . ] 4 Turn the volume knob to select the character to be searched for. 5 Press S / T to move to the entry position. 6 Press the volume knob to start searching. 7 Turn the volume knob to make a selection, then press the knob. Repeat step 7 until the desired item is selected. • To search for a character other than A to Z and 0 to 9, enter only “ ”. • To return to the previous hierarchy, press . • To return to the top menu, press number button 5. • To cancel, press and hold . DISPLAY SETTINGS 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [DISPLAY], then press the knob. Set the skip search ratio While listening to iPod or KME Light/ KMC file. . . 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [USB], then press the knob. 3 Turn the volume knob to select [SKIP SEARCH], then press the knob. 4 Turn the volume knob to make a selection, then press the knob. 0. 5% (default)/ 1%/ 5%/ 10%: Skip search ratio over the total files. 5 Press and hold to exit. 3 Turn the volume knob to make a selection (see the following table), then press the knob. Repeat step 3 until the desired item is selected or activated. To return to the previous setting item or hierarchy, press . Default: XX VARIABLE SCAN/ COLOR 01 — COLOR 24/ USER: Selects your preferred button illumination color. You can create your own color (when [COLOR 01] — [COLOR 24] or [USER] is selected). The color you have created can be selected when you select [USER]. 1 Press and hold the volume knob to enter the detailed color adjustment. [. . . ] • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (black) to prevent a short circuit. • Insulate unconnected wires with vinyl tape to prevent a short circuit. • Be sure to ground this unit to the car’s chassis again after installation. Installing the unit (in-dash mounting) Part list for installation (A) Faceplate Do the required wiring. [. . . ]