User manual KENWOOD KMM-BT308U

[. . . ] KMM-BT308U KMM-BT308 KMR-M308BT DIGITAL MEDIA RECEIVER INSTRUCTION MANUAL RÉCEPTEUR MULTIMÉDIA NUMÉRIQUE MODE D’EMPLOI RECEPTOR DE MEDIOS DIGITALES MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new Digital Media Receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] Indd 13 13 Data Size: Book Size: B6L (182 mm x 128 mm) B6L (182 mm x 128 mm) 14/11/2013 2:17:08 PM BLUETOOTH® PHONE BOOK 1 Turn the volume knob to select a name, then press the knob. 2 Turn the volume knob to select a phone number, then press the knob to call. € If the phone supports PBAP, the phonebook of the connected phone is automatically transferred to the unit when pairing. If the phone does not support PBAP, “TRANSFER PB” appears. (  15, TRANSFER PB) • Contacts are categorized as: MO (mobile), HM (home), OF (office), OT (others), GE (general) • This unit can display only non-accent letters. (Accent letters such as “Ú” is showns as “U”. ) • If the phonebook contains many contacts, (  Select a contact by name). 1 Turn the volume knob to select a number (0 to 9) or character ( , #, +). 2 Press S / T to move the entry position. Repeat steps 1 and 2 until you finish entering the phone number. (or using RC-406) 1 Press the number buttons (0 to 9) to enter the phone number. Speak the name of the contact you want to call or the voice command to control the phone functions. (  13) LOW/ MID/ FULL: Shows the strength of the battery. NO SIGNAL/ LOW/ MID/ MAX: Shows the strength of the current received signal. SETTINGS AUTO ANSWER RING MODE Default: XX 1 — 30: The unit answer incoming call automatically in the selected time. SYSTEM: The unit rings to notify you when a call/text message comes in. (Default ring tone is different according to the paired device. ) • CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming calls. € MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for incoming text messages. PHONE: The unit uses the connected phones’ ring tone to notify you when a call/text message comes in. (The connected phone will ring if it does not support this feature. ) ON: The unit rings and “SMS RECEIVED” appears to notify you of an incoming text message. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. € Increase the separation between the equipment and receiver. € Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]