User manual KENWOOD KNA-G430

[. . . ] KNA-G430 GPS NAVIGATION SYSTEM INSTRUCTION MANUAL B64-3680-08 WARNING Read this manual carefully before starting to operate the Kenwood Car Navigation System and follow the manual's instructions. Kenwood is not liable for problems or accidents resulting from failure to observe the instructions in this manual. Garmin® is a registered trademark of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin. · September 2006 Part Number 190-00493-03 Rev. [. . . ] Select your location on the map and touch OK. WAAS/EGNOS--disable and enable WAAS/EGNOS. WAAS and EGNOS are systems of satellites and ground stations that provide GPS signal corrections, giving you even better position accuracy. To learn about WAAS and EGNOS, visit http://www. garmin. com/aboutGPS/waas . html. Satellite signal strength bars The sky view shows the satellites you are receiving. The satellite signal strength bars indicate the strength of each satellite you are receiving. A solid bar indicates the GPS satellite is ready for use. KNA-G430 Instruction Manual 13 CREATING AND EDITING ROUTES CREATING AND EDITING ROUTES Creating a New Saved Route From the Menu page, touch Tools > My Data > Routes. Select an option and touch Touch Create New Next. Saved Route. Select an option and touch Next. Select the ending point. To add a stop, touch Yes, then Select your preference touch Next. and touch Next. Touch Finish. 14 KNA-G430 Instruction Manual CREATING AND EDITING ROUTES Editing a Saved Route From the Menu page, touch Tools > My Data > Routes. Touch Edit/Review Routes. Touch the route to edit. Touch Edit. Touch the item to edit. Rename--enter a new name for the route using the on-screen keyboard. Edit/Review Points--add, arrange, remove, re-order, and review points in the route. Change Preference--change calculation preference to Faster Time, Shorter Distance, or Off Road. Delete Route--delete this route. KNA-G430 Instruction Manual 15 CREATING AND EDITING ROUTES Adding Stops to Your Route You can add midpoints (also called via points or stops) to your route as you create it, as described on page 14. You can also add points to your route when you edit the route, as described below. Follow the steps on the previous page to begin editing the route. Touch where you to want to Touch Edit/Review Points. Touch a method and then select the point. Add points as necessary. Touch Done when finished. Auto Arrange--arranges the points to provide the shortest route. Remove--touch the point you want to remove and then touch Remove. Re-Order--touch the point to move and touch Move Up or Move Down. Touch Done when finished. 16 KNA-G430 Instruction Manual CREATING AND EDITING ROUTES Saving the Active Route From the Menu page, touch Tools > My Data > Routes > Save Active Route. Adding a Detour to a Route If you need to take a detour from your current route, open the Menu page and touch Detour. 1 kilometer, 5 kilometers, or 10 kilometers--select the distance of the detour. For example if a road sign indicates that the street is closed for the next five kilometers, touch 5 kilometers in the list. [. . . ] Ask Preference--select whether the unit asks for your preference each time it calculates a route. Traffic Settings the Next Turn Pop-up--select when the Next Turn pop-up window appears. Off-Route Recalculation--set the way the unit responds when off the route. You can silence the "offKNA-G430 Instruction Manual See page 22. 29 CHANGING THE SETTINGS Viewing Unit Information (About) From the Menu page, touch Settings > About. Restoring the Settings Software--the unit's software version, audio version, and unit ID are listed. Detail Maps--view information about the preloaded detailed maps. [. . . ]