User manual KENWOOD KNA-G510

[. . . ] Using the navigation system for a long time with the engine switched off can cause the battery to run down. Time before current position is displayed The mobile navigation system will not display the correct current position of the vehicle the first time it is used after purchase, or if the battery has been removed for a long time. GPS positioning signals will soon be received, however, and the correct position will be displayed. OBSERVE LOCAL TRAFFIC SIGNS AND REGULATIONS Always observe the local traffic signs and regulations whilst driving and check them against the system's instructions. Due to frequent changes in local signs and regulations, the traffic sign and regulation data on the Map DVD-ROM may be outdated. Furthermore the Map DVD-ROM cannot reckon with certain conditions such as traffic density at certain times of the day, (temporary) road closures due to construction work, weather conditions or special events taking place. [. . . ] : Carry out a simulation run in the direction of the start point. When the run has been started, this button will be displayed as , and when selected, it will cause running to take place at high speed. : Carry out a simulation run in the direction of the destination. When the run has been started, this button will be displayed as , and when selected, it will cause running to take place at high speed. : Displays the EDIT ROUTE PREVIEW screen (see page 30). The speed of the simulation run can be altered by changing the scale of the map. The simulation run is faster with a wider area map and slower with a closer up map. English 29 Route Options English Setting the conditions for simulation run Before Steps 3 (Route Options) 3 (Route Preview) 1 Select . EDIT ROUTE PREVIEW screen appears. : Stops at the destination or the next way point. : Stops at a point of interest which has been setup on the route. : Delete the POI which has been selected. POIs: Displays the six POIs from Quick-POI storage. When one of these is selected, it will be displayed on the map; furthermore, can be selected to display items other than those shown here. You can also change the viewing angle of the 3D display. Before Steps 3 (Navigation Set Up) 3 (2D/3D View) 1 Select a 2D or 3D display for the Map Screen and the Guidance Screen. Map Screen: Changes the map screen display. Guidance Screen: Changes the route guidance screen, such as the enlarged junction diagrams. 2 Select or on the angle indicator. In situations where 3D is selected on the Map screen, it will be possible to modify the map angle. The view point will be higher up when closer to , and lower down when closer to . : Restores the initial default angle setting. To implement 3D display on the right side of a dual map, touch the top of the right-hand screen and then select . 34 English Calibration This function allows you to correct any error in the position or direction of your vehicle display. Adjusting Current Position and Direction Before Steps 3 (Navigation Set Up) 3 (Calibration) 1 Select . 2 Move to the correct position and select . 3 Use or to adjust direction in which you are heading, and select . Distance This function automatically corrects any error in the display of the current position that might occur after tyre replacement. Before Steps 3 (Navigation Set Up) 3 (Calibration) 1 Select . You will have to drive about 6 miles (10km) before distance correction is complete. English 35 Navigation Set Up English Navigation Information Vehicle Signal This function allows vehicle and GPS satellite data to be displayed. Before Steps 3 (Navigation Set Up) 3 (Navigation Information) 1 Select (Vehicle Signal). VEHICLE SIGNAL screen appears. Map Version This function enables you to check the version of the map disc you are currently using. Before Steps 3 (Navigation Set Up) 3 (Navigation Information) 1 Select (Version). The version of the map disc and TMC tuner you are using now is shown. 36 English Set Clock The current time is set using this function. Since time notification is provided by a GPS satellite, time-zone adjustment can be carried out automatically. Before Steps 3 (Navigation Set Up) 3 (Set Clock) 1 Select if you would prefer 24-hour display; for 12-hour display. 2 Restore System Defaults Select to move the setting ahead by one hour, and similarly, select to move it back by one hour. This function replaces all the settings in the mobile navigation system with the initial default settings. Before Steps 3 (Navigation Set Up) 3 (Restore System Defaults) 1 Select . : Restores the average speed setting to the initial value upon factory setting. IMPORTANT If you execute Restore System Defaults, all of your Stored setting data will be deleted. [Default List] Item Map display Search Area Display Guidance Language Map Orientation (1 and 2 screen) Map Display Mode Map Display Scale Initial condition B (Belgium) UK English North up 2D, single-screen display Single-screen: 10, 000 map (1/16 min) (100 m) Dual-screen: 40, 000 map (1/4 min) (500 m) Arrow Mode Off Off Auto On Off Next passage point Item Navigation Setup Menu Distance Road Restriction Warnings Audio Mute Keyboard Layout Arrival Time Colour Scheme Guidance Screen Q-POI Selection Initial condition km On On ABC Estimated arrival-time display 1 On A : Petrol B : Parking C : All Restaurant D : Hotel E : Hospital F : Golf Cource 4 2D (Map/Guidance Screen) 23° 24h Short Cut 1: Detour Short Cut 2: Map Direction Quick Allow Motorway :On Allow Toll Road: Off Allow Ferry: Off Allow Restricted Road: Off Allow Seasonal Restricted Road: Off Allow Car Train: On On Off On Auto - Germany Map Configuration Q-POI Map Display Show POI Icon Display Map Mode Right Screen Setting, POI Right Screen Setting, 3D Passage Point Display/ Current Location, Map Screen (Time Requirement, Time, Direction/Distance) Passage Point Display/ Full Route, Map Screen (Time Requirement, Time, Direction/Distance) On-Route Scroll Setting Mode On-Route Scroll Display Items Motorway information Notify Seasonal Restrict Border guidance Language Selection Menu Language Voice Recognition Volume Presets 2D/3D View Remote Control Route Options Search Condition Route Preferences Destination Next passage point or Destination mode Unselected On On On UK English UK English RDS-TMC Menu Show RDS-TMC info. Dynamic navigation Voice guidance Country English 37 Stored Locations English You can store, edit, or delete any destinations, way points, or marked point. 1 2 Select Select . (Stored Locations). 3 Select the item you want. (Memory Points): Places a marker on the map (see page 39). (Avoid Area): Stores any areas to be avoided (see page 43). & Way Pt. ): Sets the destination (and way points) (see pages 26 through 28). (Home): Stores the location of your home (see page 44). (Previous Dest. ): Deletes previously stored destinations (and way points) (see page 45). [. . . ] (8) While the system is searching again for the route, the route indication might not appear in time for the next right or left turn. (9) The route might not change even if a search is made again. (10) The system might guide the driver to make a U-turn. (11) The system might guide the driver on a road that cannot actually be travelled (such as on a road in which entry is prohibited). [. . . ]