User manual KENWOOD KOS-A200

[. . . ] Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your External Media controller system. Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. [. . . ] Replaying the song, disc in the Disc changer or Audio file folder you are listening to. Each time you press the button, the Repeat Play alternates between the modes shown in the tables below. Each time you press the button, the Magazine Random Play turns ON or OFF. When you press the [¢] button, the next random song starts. Quickly selecting the folder you want to hear. With the [5] button you move 1 level down and with the [] button 1 level up. selecting a folder in the same level Press the [4] or [¢] button. With the [4] button you move to the previous folder, and with the [¢] button to the next folder. Playing randomly from all of the Audio files recorded in the media. When you press the [¢] button, the next random song starts. The radio may take a little time to start receiving after you select the SIRIUS source. You cannot Channel search until the category information is acquired. On each band, you can put 1 channel in the memory on each [1] -- [6] button. ⷠOnly the channel number is stored. If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. ⷠYou can set up until Channel number 223. You cannot search for a channel number which is not broadcasting. You cannot search for a channel number which is not broadcasting. Each time you press the button, the preset band alternates between the SR1, SR2, SR3 and SR4. 2 Release the button when the song you want Channel Preset Memory putting the channel in the memory. To hear is received Press the [SCAN] button. 2 Select the channel to put in the memory Each time you press the button, the band alternates between the F1, F2, and F3 bands. [. . . ] If the "E-99" code does not disappear, consult your nearest service center. No sound can be heard, or the volume is low. The preset broadcast station is not transmitting in the mode that was set with <Receive mode Setting>. please set <Receive mode Setting> (page 24) to "AUTO". [. . . ]