User manual KENWOOD KR-1000B

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230V only *Other countries . . . . . . . . . . . . . . . . . . . . AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. For replacement, use only a 3-Amp ASTA-approved (BS 1362) fuse. Preparations 2. [. . . ] Be specially careful against contact cleaners containing oil, for they may deform the plastic component. Reference Preparations Disc handling precautions Handling Hold the discs so that you do not touch the playing surface. Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause a malfunction. Label side Playing side Disc accessories Sticker Do not attach paper or tape to either the playing side or the label side of the discs. The disc accessories (stabilizer, protection sheet, protection ring, etc. ) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. Sticky paste Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Note related to transportation and movement Before transporting or moving this unit, carry out the following operations. Set the POWER key to ON without loading a disc. Wait a few seconds and verify that the display shown appears. Set the POWER key to OFF. Beware of condensation When the difference between the internal temperature of the unit and external atmosphere is large, dew (mist) may be produced on the internal parts of the unit. In such a case, turn the unit ON and leave it for a few hours until the condensation has dried up. Be especially careful in the following conditions: When the unit is brought into a place where there is a large difference in temperature between the previous location, when the humidity of the listening room is high, etc. System Connections Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related components. 11 KR-1000B/DVF-3050 (EN/K, P, T, M, Y) Caution: Do not plug in the power lead until all connections are completed. and Canada Caution Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard. ÷ Do not place any objects impairing heat radiation onto the top of unit. ÷ Press the PLAY key to resume normal playback. DVD VCD Slow motion playback SLOW REMOTE ÷ During playback, press the SLOW keys ÷ Each press switches the motion speed. 1 2 3 4 F. SLOW 1/16 F. SLOW 1/8 F. SLOW 1/4 F. SLOW 1/2 (R. SLOW 1/16) (R. SLOW 1/8) (R. SLOW 1/4) (R. SLOW 1/2) (At the time of VCD playback) 1 F. SLOW 1/8 (R. SLOW is not possible) 2 F. SLOW 1/4 (R. SLOW is not possible) 3 F. SLOW 1/2 (R. SLOW is not possible) ÷ Press the PLAY key to resume normal playback. Using the On-screen banner display KR-1000B/DVF-3050 (EN/K, P, T, M, X) 17 The on-screen Banner Display contains many playback features. To see the Banner Display, press ON SCREEN key on the remote while a disc is playing. Use the Cursor (Up/Down/Left/Right) keys on the remote to move through the different features in the Banner Display. Each feature is illustrated with an icon. 1 During playback, press the ON SCREEN key on the remote. When playing a DVD CHAPTER SUBTITLES AUDIO BOOKMARKS DISC TYPE ON SCREEN TITLE ANGLES TIME INDICATOR 2 Press the Cursor left/right (2/3) keys to highlight a banner display icon. When playing a CD/VCD INTROSCAN TRACK TIME INFORMATION DISC TYPE BOOKMARKS MULTI CONTROL Operations TIME INDICATOR Time indicator contents Switch the CD time indicator as follows. 3 Press the ENTER key. 1 Select the time information with the cursor key. 2 Each time the ENTER key is pressed, the time indicator changes as follows. 1 Track Elapsed (elapsed time of the track being played) 2 Track Remain (remaining time of the track being played) 3 Disc Elapsed (elapsed time of the disc being played) 4 Disc Remain (remaining time of the disc being played) ENTER To display disappear from the screen Press the ON SCREEN key or CLEAR key Notes or ON SCREEN CLEAR ÷ You can only access the banner display when you're playing a disc. ÷ The banner display feature are only available if the disc was created with that particular feature (i. e. , if you select the Subtitle icon, you won't be able to change the subtitle language unless the author of the disc created the disc with subtitles). ÷ The invalid symbol appears on the screen when you press a key that doesn't have any function. [. . . ] "Dolby", "AC-3", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. All rights reserved. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. 38 Specifications DV-402/DVF-3530 (EN/K, P, T, M, X) [Type] System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD video player system Signal read system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Semiconductor laser Digital output level/impedance COAXIAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]