User manual KENWOOD KR-9400 SERVICE MANUAL

[. . . ] In order to effectively use the remote control it IS Important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). Using the remote control without completely understanding its design and how to switch the operation modes may result in Incorrect operations. B60-5027-00 00 a (K, P, Y, M, X, I) r%-; 0009 Units are deslgned for operation as follows. AC 120 V only AC 240 V only AC 230 V only AC 220 V only V switchable* Unpack the unit carefully and make sure that all accessones are put aslde so they will not be lost. Examine the unit for any possibility of shlpplng damage. [. . . ] , : . - UTOKINEMA EQ Recording music in A-REC or M-REC mode DIMMER IX-R0613 INPUT 0 Use the INPUT DVD, DVD/Gch, 8 Set the cassette 0 Press select l SELECTOR SELECTOR knob to select the source (CD/ VIDEOS or VIDE03) you want to record. to m fl"ethe INPUT SELECTOR knob or TUNER key io select ihe broadcast band. in the display and hold the DIMMER key for more than 2 seconds the A-REC or M-REC mode. every 2 seconds as shown below. q Use the BAND key to select the dewed Each press as follows: c @FM @AM switches the band appears "AM" or "FM" indicator The mode changes 0 Ret mode ofl 0 A-REC 0 M-REC The digital Input record mode IS switched off. The digital Input signals (DTS, Dolby Digital, orPCM)areidentified automatically and converted into stereo signals that are ready for recording. Themputsrgnaltypeatthemoment thus mode IS selected IS held throughout this mode. . . . . . " " " -0, 0, , AL STEPEO . . . . . -omrr ITmE q Use the AUTO/CINEMA ED. key to select ihe desired tuning method. Each press ~1 0 AUTO @AUTO switches the tuning lit (auto tuning) not lit (manual tuning) method as follows: "AUTO" Indicator lights up For A-REC mode: In the dis~`ay. :. . . . . l Normally, set to "AUTO" (auto tunrng). If the radio waves are weak and there IS a lot of Interference, switch to manual tunrng. (With manual tuning, stereo broadcasts will be received In monaural. ) q omTA/ EIll D LpE MULTI CONTROL knob or keys to select the Frequency display For M-REC mode: . & i :::" " : : :" " . . , . . . . . . Thus channel delivers separate non-directional bass srgnals to the subwoofer for more dynamrc deep bass sound effects. The Indication "LFE" appears rn the display when a srgnal IS berng Input for thus channel. Manufactured under license from Digital Theater Systems, Inc. 5451, 942 and other worldwrde patents rssues and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. All rights 1 reserved. DIGITAL m SURROUND Front speakers Manufactured under license from Dolby Laboratones. Dolby, Pro Logrc and the double-D symbol are trademarks of Dolby Laboratones. All rights reserved. (L, R) "Circle Surround and the (@)"symbol are trademarks of SRS Labs, Inc. rn the United States and selected forergn countries. Circle Surround technology IS Incorporated under license from SRS Labs, Inc" I Dolby PRO LOGIC II Dolby Pro Logic II was desrgned specifically to provrde a new sense of spatiality, directionality and articulation of sounds from Dolby Surround encoded sources (such as vrdeo and Laserdisc software marked W~WLMS~R~OUND~). Thus IS achreved with an Intelligent, built-In feedback logrc desrgn, a matnxsurround decoding and the decoding of stereo, full bandwidth surround outputs. The PRO LOGIC II modes programmed rntothrsreceiverare"MOVIE", "MUSlC"and "PROLOGIC" The"MOVIE" mode of the PRO LOGIC II has preset characteristics to produce a calibrated, hrgh-level surround sound playback while the "MUSIC" mode has user-adjustable characteristics to offer the three optional controls, like "Dimensron" , "Center Width" and "Panorama mode" to allow optimtzation of the soundfields as desrred. [. . . ] This limited warranty remains In effect for the period indicated from the date of the ongmal consumer purchase. 2 years parts and labor LIMITATIONS OF LIMITED WARRANTY Except as specified below, this warranty covers all defects m matenal and workmanshlp for this product. The followlng items are not covered under the terms of this limited warranty. Voltage and/or line frequency converslons. [. . . ]