User manual KENWOOD KRC-22

[. . . ] Otherwise it may fall out of place when jolted. · When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0. 75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. [. . . ] Listening to the other side: Press the FF button and REW button at the same time. Stopping and Ejecting Cassettes: Press the 0 button. The tape stops playing and the cassette ejects. NOTE Tuner Call Switch automatically to the tuner while you are rewinding or fast forwarding the tape. Turning Tuner Call On/Off: Press the T. C(T. CALL) button to switch tuner call on and off. The T. CALL indicator lights up when tuner call is turned on. Remove a cassette from the unit when not listening to it for a while. If you leave it in the unit too long, the tape may stick to the tape head and cause unit malfunction. Fast Forwarding and Rewinding Cassette Tapes Fast Forwarding Tapes: Press the FF button. The tape indicator blinks in the direction of the tape as it is being fast forwarded. If the REW button is pressed, normal tape play will begin. The tape indicator blinks in the direction of the tape as it is being rewound. If the FF button is pressed, normal tape play will begin. -- 11 -- External disc control features Function of the KRC-22/KRC-28MR English SRC 4 DISC+ ¢ When the disc changer with the O-N selection switch is connected, set the switch to "N" position to operate the external disc control mode. SRC PWR OFF REW PR FF OG HIGH POWER 40Wx 4 AUTO AME CLK ADJ FM CRSC DISC Playing Disc mode This function permits the connection of optional players and the playing of discs. LOUD SCAN RDM REP TC/D. SCN M. RDM ATT 1 2 3 4 5 6 AUD A. ADJ AM SCAN RDM REP D. SCN M. RDM DISC- Playing Discs: Press the SRC button repeatedly to select the external disc control mode. The disc will start playing. NOTE REP indicator Track number Disc number The external disc control mode will differ, depending on the unit that is connected. The SCN indicator lights up and the first 10 seconds of each track will be played, in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the SCAN button again to stop the scan and keep on listening to a track normally. NOTE Random Play Play all the tracks on the current disc in random order. 1 Press the RDM button to switch random play on and off. The RDM indicator lights up when random play is turned on. The track number will change over and over in the display as the next track is being selected. When the track has been selected, play will begin. The selected track number blinks in the display as it is being played. NOTE · The track scan function is canceled when you eject the disc. · The track scan function only scans each track on a disc once. When all the tracks on a certain disc have been played using random play, the next disc on the changer will start playing using the same function. 2 To change the track being heard, press the ¢ button. Another track will be selected and played. NOTE Disc Scan (Function of disc changers) Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D. SCN button. The SCN indicator lights up and the first 10 seconds of each disc will be played, in the order they are loaded on the changer. The disc number currently being heard blinks in the display. Stopping to Listen to the Disc Being Scanned: Press the D. SCN button again to stop the scan and keep on listening to the disc normally. NOTE Random play is canceled when you eject the disc. Magazine Random Play (Function of disc changers) Play the tracks on all the discs in the disc changer in random order. 1 Press the M. RDM button to switch magazine random play on and off. [. . . ] Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something with the CD is wrong. Press the reset button on the unit (see p. 4). The sound skips. Something is touching the disc changer. The CD is scratched or dirty. The display shows that the changer is being played, but no sound can be heard. [. . . ]