User manual KENWOOD KRC-294A

[. . . ] • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] 8 Exit Menu mode Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, "MRDM ON" is displayed. When the [¢] button is pressed, the next song select starts. Press the [MENU] button. • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes. • Media that you can attach a name to - External CD changer/ player: Varies according to the CD changer/ player. • The name of a CD can be changed by the same operation you used to name it. — 14 — KRC-294A(E-W)_U. S r2-E2W 01. 11. 2 10:19 AM Page 15 Menu system Text/Title Scroll Scrolling the displayed CD text or MD title. Press the [SCRL] button. AM 4 ¢ FM MENU Menu display — 15 — KRC-294A(E-W)_U. S r2-E2W 01. 11. 2 10:19 AM Page 16 Menu system English Menu System Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "BEEP ON" "BEEP OFF" Setting Beep is heard. Beep canceled. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed. Manual Clock Adjustment 2 Select the menu item Press the [FM] or [AM] button. Make sure only to use the accessories shipped with the unit, as shown above. Installation Procedure 1. To prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. Make the proper input and output wire connections for each unit. Cars with an ISO connector: Connect the speaker connector of the car to Connector B of the unit, and then connect the external power connector to Connector A. Cars without an ISO connector: First connect the wire of the wiring harness, and then connect the wiring harness connector to the unit. Reconnect the - terminal of the battery. Press the reset button. • If your car is not prepared for this special connection-system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all wire connections are securely made by inserting jacks until they lock completely. • If your vehicle's ignition does not have an ACC position, or if the ignition wire is connected to a power source with constant voltage such as a battery wire, the power will not be linked with the ignition (i. e. , it will not turn on and off along with the ignition). If you want to link the unit's power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. [. . . ] ✔ A non-compatible CD changer is being used to play the CD-R/CDRW. 61 ☞ Use a CD changer compatible with CD-R/CD-RW to play. ? ? ?? The blank skip doesn’t work. 47 ✔ Because noise is too loud, the non-recorded part can’t be recognized. Blank Skip functions at places that are recorded. 48 ✔ Because the recording level is low, it’s recognized as not recorded. ☞ Turn Blank Skip OFF. ? Track Search can't be done. 66-2 ✔ For the albums first or last song. [. . . ]