User manual KENWOOD KRC-366

[. . . ] Otherwise it may fall out of place when jolted. · When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0. 75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. · To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit. · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. [. . . ] Each time the button is pressed the Magazine Random Play turns ON or OFF. When it's ON, "M. Random ON" is displayed. When the [¢] button is pressed, the next song select starts. Track Scan Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. Text/Title Scroll Scrolling the displayed CD text or MD title. Press the [DISP] button for at least 1 second. 1 Start Track Scan Press the [SCAN] button. Release it when the song you want to listen to is played Press the [SCAN] button. 2 DNPP (Disc Name Preset Play) (Function of disc changers with remote) Selecting the CD displayed in the DNPS of the CDs set in the Disc changer. 1 Random Play Playing all the songs on the disc in random order. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "Random ON" is displayed. When the [¢] button is pressed, the next song select starts. Enter DNPP mode Press the [DNPP] button on the remote. When "DNPP" is displayed the DNPS display in order. Forward / Reverse display Press the [DISC­] or [DISC+] button. 2 When the disc you want is displayed Press the [OK] button on the remote. The disc being displayed is played. Canceling the DNPP mode Press the [DNPP] button on the remote. -- 16 -- Menu system Menu System 38 AM FM SRC Setting during operation beep sound etc. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 AUTO AME Enter Menu mode Press the [MENU] button for at least 1 second. Do the step 4 and 5 step operation, and reenter the security code. The Security Code function activates. Manual Clock Adjustment 1 Select Clock Adjustment mode Press the [FM] or [AM] button. Select the "Clock Adjust" display. -- 18 -- 2 Enter Clock Adjust mode Press the [4] or [¢] button for at least 1 second. Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [4] or [¢] button. Contrast Adjustment Adjusting the display contrast. Display and Setting "Contrast 0" "Contrast 5" (Original setting) "Contrast 10" . . . . . . 3 4 Exit Clock adjustment mode Press the [MENU] button. Selectable Illumination Selecting the button illumination color as green or red. Display "Button Green" "Button Red" Setting The illumination color is green. The illumination color is red. Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "Dimmer ON" "Dimmer OFF" Setting The display dims. The display doesn't dim. Switching Graphic Display Setting the graphic part display ON/OFF. [. . . ]  Conduct finalization processing with CD recorder. A non-compatible CD changer is being used to play the CD-R/CDRW. 61  Use a CD changer compatible with CD-R/CD-RW to play. ? ? ?? The blank skip doesn't work. 47 Because noise is too loud, the non-recorded part can't be recognized. Blank Skip functions at places that are recorded. 48 Because the recording level is low, it's recognized as not recorded. [. . . ]