User manual KENWOOD KRC-566

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] · The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Disc number Fast Forwarding and Reversing Fast Forwarding Hold down on the [¢] button. Release your finger to play the disc at that point. Release your finger to play the disc at that point. -- 17 -- External disc control features English Track Search Selecting the song you want to hear. Press the [4] or [¢] button. Scan Play Playing the first part of each song on the disc you are listening to and searching for the song you want to listen to. 1 Disc Search (Function of disc changer) Selecting the disc you want to hear. Press the [DISC­] or [DISC+] button. Start Scan Play Press the [SCAN] button. Release it when the song you want to listen to is played Press the [SCAN] button. 2 Random Play Track/Disc Repeat Replaying the track/disc you're listening to. Each time the button is pressed the Repeat shown below. Repeat play Track Repeat Disc Repeat (Function of disc changer) OFF Play switches as When the [¢] button is pressed, the next song select starts. Playing all the songs on the disc in random order. Each time the button is pressed Random Play turns ON or OFF. When it's ON, "RDM ON" is displayed. Display "(T-)REP ON" "D-REP ON" "REP OFF" Magazine Random Play (Function of disc changer) Play the songs on all the discs in the disc changer in random order. Each time the button is pressed the Magazine Random Play turns ON or OFF. Enter Security Code mode Press the [4] or [¢] button for at least 1 second. When "ENTER" is displayed, "CODE" is displayed. Select the digits to enter Press the [4] or [¢] button. Select the Security Code numbers Press the [FM] or [AM] button. Repeat steps 4 and 5, and complete the Security Code. Confirm the Security Code Press the [¢] button for at least 3 seconds. When "RE-ENTER" is displayed, "CODE" is displayed. Do the step 4 through 7 step operation, and reenter the security code. The Security Code function activates. If you enter a Code different from your Security Code, you have to start over from step 4. Do the step 4 through 7 step operation, and reenter the security code. The unit can be used. If an incorrect code is input, "WAITING" is displayed, and the input prohibited time shown below is generated. After the input prohibited time lapses, "CODE" is displayed, and input can be done. 2 3 4 5 6 7 8 Number of times the incorrect code was input 1 2 3 4 Input prohibited time -- 5 minutes 1 hour 24 hours Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. [. . . ] The specified disc does not play, but another one plays instead. 52 The specified CD is quite dirty. The disc is loaded in a different slot from that specified. 54 Eject the disc magazine and check the number for the specified disc. The disc is severely scratched. 55 Try another disc instead. ? ? ?? The blank skip doesn't work. 47 Because noise is too loud, the non-recorded part can't be recognized. [. . . ]