User manual KENWOOD KRC-608

[. . . ] 33 —2— Safety precautions 2WARNING To prevent injury or fire, take the following precautions: • Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. € When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0. 75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating. [. . . ] Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) Pressing the 4 button while listening to track 1 will only search back to the beginning of that track. The reverse search is not "recycled" to the last track on the disc. Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) You cannot make a forward track search when listening to the last track on a disc. € You can give names to discs through the presetting disc name function (page 18). Note that depending on the unit, display may not be possible. € If you try to display the name of a disc that does not have one, "NO NAME" is displayed instead. Turning Repeat Play On/Off: Press the REP button to switch repeat track/disc play on and off as follows: ▼ Track Repeat ON ▼ ▼ Disc Repeat ON Repeat OFF “T-Repeat ON” is displayed and the track number blinks in the display when track repeat is on. €D-Repeat ON” is displayed and the disc number blinks in the display when disc repeat is on. NOTE — 17 — External disc control features English Random Play Play all the tracks on the current disc in random order. NOTE 1 Press the RDM button to switch random play on and off. €Random ON” is displayed when random play is turned on. The track number will change over and over in the display as the next track is being selected. When the track has been selected, play will begin. The selected track number blinks in the display as it is being played. NOTE • Magazine random play is canceled when you eject the disc. € The time needed for random selection depends on the number of discs loaded in the disc magazine. Text / Title Scroll This function permits the text to be scrolled and the entire text to be displayed. [. . . ] Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves. Cannot play CD-R or CD-RW The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. Turn off random play or magazine random play. [. . . ]