User manual KENWOOD KRC-609

[. . . ] KRC-609 KRC-509S CASSETTE RECEIVER INSTRUCTION MANUAL AMPLI-TUNER-LECTEUR DE CASSETTE MODE D’EMPLOI RADIO CASSETTE MANUAL DE INSTRUCCIONES Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new cassette-receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. [. . . ] € When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO TITLE/NO NAME" is displayed for MD. € If you attempt to display disc title/track title when connecting the CD changer not supported for CD text feature, caution messages such as "NO TEXT" or "Reading" may be displayed. € Depending on the type of characters of the CD Text, some characters may not be displayable. Fast Forwarding and Reversing Disc Play Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: — 16 — Disc Search Search forward or backward through the discs in a disc changer. Making a Reverse Disc Search: Press the AM button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the FM button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. NOTE Repeat play is canceled when you eject the disc. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan: Press the SCAN button. €Scan ON” is displayed and the first 10 seconds of each track will be played, in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the SCAN button again to stop the scan and keep on listening to a track normally. NOTE “Load” is displayed when discs are being exchanged on the disc changer. € The track scan function is canceled when you eject the disc. € The track scan function only scans each track on a disc once. Track / Disc Repeat Repeat playing the track or the disc currently being listened to. [. . . ] The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. conduct finalization processing with CD recorder. Use a CD changer compatible with CD-R/CD-RW to play. Finalization processing is not being conducted for CDR/CD-RW. [. . . ]