User manual KENWOOD KRC-666

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. NOTE Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : w Track Repeat ON w Disc Repeat ON w Track/Disc Repeat OFF "Track Repeat ON/T-Repeat ON" is displayed and the track number blinks in the display when track repeat is on. "Disc Repeat ON/D-Repeat ON" is displayed and the disc number blinks in the display when disc repeat is on. NOTE You cannot make a forward track search when listening to the last track on a disc. Disc Search Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. The repeat play function is cancelled when you stop playing the disc. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Track Scan Successively play the beginning of each track on a disc until you find the track that you want to listen to. Starting the Track Scan : Press the SCAN button. "Track Scan ON/T-Scan ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. -- 24 -- Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE · The track scan function is cancelled when you stop playing a disc. · The track scan function only scans each track on a disc once. The display of the track number changes continuously as the next track is being selected. · This procedure is not to be used to store the disc and track titles for MDs that you record. The operation and characters that can be entered may change as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, +, ­, *, =, <, >, [ and ]. 5 Continue steps 3 and 4 until all the characters are chosen for the name. 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is 6 Press either the NAME. S button on the main unit or the OK -- 26 -- button on the remote control. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE · The number of characters and discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. · Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. [. . . ] The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something is wrong with the CD. Press the reset button on the unit (see page 4). The sound skips. Something is touching the disc changer. [. . . ]