User manual KENWOOD KRC-669

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Play starts at the beginning of the displayed disc. NOTE Track/Disc Repeat OFF The track number blinks in the display when the track repeat function is on. The disc number blinks in the display when the disc repeat function is on. NOTE The repeat play function is cancelled when you stop playing the disc. Track Scan Function Successively play the beginning of each track on a disc until you find the track that you want to listen to. Turning Track Scan Function On/Off: Press the SCAN button to switch the track scan function on and off. The first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. · The track scan function is cancelled when you stop playing a disc. · The track scan function only scans each track on a disc once. -- 23 -- Disc control features (See page 7) English Function of disc changers NOTE Disc Scan Function Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Turning Disc Scan Function On/Off: Press the D. SCN button to switch the disc scan function on and off. The first 10 seconds of each disc are played, in the order in which they are loaded on the changer. The disc number currently being heard blinks in the display. Stopping to Listen to the Disc Being Scanned: Press the 38 or D. SCN button again to stop the scan and keep on listening to the disc normally. NOTE The random play function is cancelled when you stop playing a disc. · When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO NAME" is displayed for MD. · Depending on the type of characters of the CD Text, some characters may not be displayable. When the disc or track to be played changes, the title is displayed in one scrolling display. 2 Holding down the DISP button for one second or more results in one scrolling display of the titles. NOTE Text Scroll This function permits the text to be scrolled and the entire text to be displayed. Switching between manual scrolling and automatic scrolling is permitted. The factory default is manual scrolling. To scroll manually: 1 Press the DISP button to display the disc title or the track title. Only units with a CD text feature permit title display. -- 25 -- Disc control features (See page 7) English Presetting Disc Names Store the names of discs to be displayed when played. as listed below, depending on the unit that is connected. A press of the 38 button exits the disc name preset mode. Operations can be followed again from Step 2 at a time such as this, and the characters to be input are selected using the procedure described below. Press the DISC+ or DISC­ button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, +, ­, , =, <, >, [ and ]. NOTE 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. 2 Press the NAME. S button for at least two seconds. "NAME SET" is displayed and the disc name preset mode is entered. [. . . ] The specified disc does not play, but another one plays instead. POSSIBLE CAUSE No cable has been connected to the disc changer input terminal on the unit. The disc is loaded in a different slot from that specified. The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. Eject the disc magazine and check the number for the specified disc. [. . . ]