User manual KENWOOD KRC-765

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Play starts at the beginning of the displayed disc. NOTE You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is cancelled when it reaches the beginning of a track, at which point normal play automatically resumes. Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) Pressing the 4 button whilst listening to track 1 only searches back to the beginning of that track. The reverse search is not "recycled" to the last track on the disc. Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. "Load" is displayed when discs are being exchanged on the disc changer. Track / Disc Repeat Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : -- 22 -- Random Play Play all the tracks on the current disc in random order. Track Repeat ON Disc Repeat ON 1 Press the RDM button to switch the random play function on and off. "Random ON" is displayed when random play is turned on. The titles will be displayed in one scrolling display. NOTE 3 Press either the 4 or ¢ button to move the cursor to the desired position. The 4 button moves the cursor to the left, and the ¢ button to the right. 4 Each time the 38 button is pressed, the characters to be entered change as listed below. Press the FM or AM button to display the desired character. -- 24 -- Menu settings Characters that can be displayed are as follows. Alphabet (upper case): A ~ Z Alphabet (lower case): a ~ z (KDC-__ Only) Numerals and symbols: 0~9 @ " ` ` % & +-=, . /\<>[] LOUD B NR SCAN B. S/RDM REP MTL/M. RDM TI VOL ADJ DISP NAME. S PROG /PTY PWR OFF 38 FM MENU AUD Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß < fl â ä ê ëîïôöûüñç©Æ>fi (KDC-__ Only) 5 Continue steps 3 and 4 until all the characters are chosen for the name. # 1-6 DISP 4 AM ¢ 6 Press the NAME. S button. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters input so far. NOTE KRC-V679R Menu display · The number of characters and discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details. · Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too. · If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes. · Pressing the reset button does not erase the disc names stored in a disc changer. NEWS indicator AUTO indicator RDS indicator KRC-765/KRC-579R/KRC-579B Menu display NEWS indicator AUTO indicator RDS indicator -- 25 -- Menu settings English Menu System You can set the defaults for additional functions in the menu mode. Make a setting for each function, referring to the following operations. Code Security Function After a security code has been registered, power cannot be restored if the battery is disconnected from the unit unless the code is first input. NOTE 1 Enter the menu mode Hold down the MENU button for one second or more. [. . . ] Track repeat, disc repeat, track scan, random play, and magazine random play start by themselves. Cannot play CD-R or CD-RW The computer chip in the unit is not functioning normally. Random play or magazine random play has been selected. The setting is not cancelled. Turn off the random play or magazine random play function. The settings for these functions remain on until the setting to off or the disc ejected, even if the power is turned off or the source changed. [. . . ]