User manual KENWOOD KRC-766

[. . . ] • If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. • Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] • Sections recorded at low levels may trigger the blank skip function if they last for 10 seconds or more. Music Repeat Repeatedly plays the current track. Turning Music Repeat Function On/Off: Press the REP button to switch the music repeat function on and off. "REP ON" is displayed when music repeat is turned on. Cancelling Music Repeat Function: Press either the REP or PROG button. NOTE The tape advance function "knows" where a track begins by detecting the blank space preceding it (i. e. , the space between tracks). However, when the blank space lasts for less than 4 seconds or contains noise, this function may not operate correctly. Furthermore, sections recorded at low levels may trigger the function if they last for 4 seconds or more. The music repeat function "knows" where a track begins by detecting the blank space preceding it (i. e. , the space between tracks). However, when the blank space lasts for less than 4 seconds or contains noise, this function may not operate correctly. Furthermore, sections recorded at low levels may trigger the function if they last for 4 seconds or more. — 18 — KRC-766_U. K 2003. 10. 06 08:13 AM Page 19 External disc control features 38 4 SRC FM/ ¢ DISC+ POWER OFF SRC FM CLK DISC PROG/PTY ATT LOUD B NR SCAN B. S/RDM REP D. SCN MTL/M. RDM TI VOL ADJ NAME. S DISP MENU DISC AM 1 2 3 4 5 6 AUD SCAN RDM REP D. SCN M. RDM DISP/NAME. S MENU AM/ DISC- ■ When a unit equipped with an O-N switch is to be connected, please also see the instruction manual of this unit. ■ When a unit that is not equipped with an O-N switch, or the changer switching unit "KCA-S200" is connected, "O"operation will be set. "N"-operation: • The disc title and track title of the CD text can be displayed. • The disc name will be displayed when the name has been registered to any connected unit with the Presetting Disc Names function, or when the playing unit contains a disc to which the disc title has been recorded. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. Starting the Track Scan : Press the SCAN button. "TSCN ON" is displayed and the first 10 seconds of each track are played, and the tracks are played in order. The track number currently being heard blinks in the display. Stopping to Listen to the Track Being Scanned: Press the 38 or SCAN button again to stop the scan and keep on listening to a track normally. NOTE • The track scan function is cancelled when you stop playing a disc. • The track scan function only scans each track on a disc once. Track / Disc Repeat Repeat playing the current track or disc. Turning Repeat Play Function On/Off: Press the REP button to switch the repeat play function on and off as follows : ▼ Disc Scan Successively play the beginning of each disc on a changer until you find the one that you want to listen to. Starting the disc scan: Press the D. SCN button. "DSCN ON" is displayed and the first 10 seconds of each disc are played, in the order in which they are loaded on the changer. The disc number currently being heard blinks in the display. [. . . ] The disc is loaded in a different slot from that specified. The disc is severely scratched. SOLUTION Connect the cable to the disc changer input terminal on the unit. Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something is wrong with the CD. [. . . ]