User manual KENWOOD KRC-883W SERVICE MANUAL

[. . . ] · If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. · Make sure not to get your fingers caught between the faceplate and the unit. · Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts. [. . . ] Release your finger to play the disc at the point. NOTE Disc Search Search forwards or backwards through the discs in a disc changer until you reach the one that you want to listen to. Making a Reverse Disc Search: Press the DISC­ button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc. NOTE You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is cancelled when it reaches the beginning of a track, at which point normal play automatically resumes. Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts at the beginning of the displayed track number. NOTE "LOAD" is displayed when discs are being exchanged on the disc changer. Pressing the 4 button whilst listening to track 1 only searches back to the beginning of that track. When the disc/track has been selected, play starts. The selected disc/track number blinks in the display as it is being played. NOTE Track time w Disc name w Disc title (Units featuring CD text/MD only) w This function is not available with the following models: KDC-C200/C300/C400/C301/C401 Track title (Units featuring CD text/MD only) w 2 To change the track being heard, press the ¢ button. Another disc/track is selected and played. NOTE Clock NOTE · The magazine random play function is cancelled when you stop playing a disc. · The time needed for random selection depends on the number of discs loaded in the disc magazine. · You can give names to discs through the presetting disc name function (see p. Note that depending on the unit, display may not be possible. · If you try to display the name of a disc that doesn't have one, "NO NAME" is displayed instead. · The clock is displayed only when the Switching Clock display function (P. 31) is on. · When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO NAME" is displayed for MD. · Depending on the type of characters of the CD Text, some characters may not be displayable. -- 25 -- Disc control features (See page 7) English Presetting Disc Names Store the names of discs to be displayed when played. NOTE Direct Alphabet Input If the disc changers that were manufactured and sold after 1997 are connected, you can directly input letters using the number/letter entry buttons on the remote control. Example: Use the following table to enter the name "DANCE". 1 Play the disc whose name you want to preset. NOTE · This function is not available for disc changers that do not feature the Disc Name Preset function. · This procedure is not to be used to store the disc and track titles for MDs that you record. Character Button to press # Times pressed "D" "A" "N" "C" "E" the name. NOTE #3 #2 #6 #2 #3 1 1 2 3 2 2 Hold down the NAME. S button for two seconds or more. "NAME SET" is displayed and the disc name preset mode is entered. The cursor blinks in the position where character input can be made. 3 Press either the 4 or ¢ button to move the cursor to the desired position. [. . . ] Eject the disc magazine and check the number for the specified disc. If skipping happens at the same place when the car is stopped, something is wrong with the CD. Press the reset button on the unit (see page 4). The specified disc does not play, but another one plays instead. The specified CD is very dirty. The disc is loaded in a different slot from that specified. [. . . ]