User manual KENWOOD KRF-V4080D

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. Remote control unit (1) ­ KRF-V9300D : RC-R0923 ­ KRF-V8300D : RC-R0831 ­ KRF-V7300D : RC-R0733 Batteries* (R03) (2) * Batteries are attached to the packing material. KRF-V9300D/KRF-V8300D only Setup microphone (Cord length : About 5m) (1) Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossedout wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. [. . . ] "SB Largex2" "SB Largex1" Surround Back speaker "SB Normalx2" "SB Normalx1" "SB Off" "Return" Large size surround back speakers (left and right) are connected. (7. 1ch) Large size surround back speaker (left only) is connected. (6. 1ch) Average size surround back speakers (left and right) are connected. (7. 1ch) Average size surround back speaker (left only) is connected. (6. 1ch) Surround back speakers are not connected. Returns to Setup Menu. SETUP ENTER MULTI CONTROL /// Setup 4 Press [ENTER] to enter the setting. Speaker configuration ­"SP Setup"­ Select the use of each speaker and its size. · Reference for speaker size "Large" : A speaker with a sufficient bass reproduction capability (a speaker with a large woofer or a large cabinet size). "Normal" : A speaker with a lower bass reproduction capability than the "Large" speakers (the bass frequencies will be output from the speakers set to "Large" and the subwoofer). If you cannot identify the size of a speaker, it is recommended to set it to "Normal". · When "SUBW Off" is selected, the front speakers are automatically set to "FRNT Large". · For "FRNT Large" selection, no sound will be heard from subwoofer even it is set to ON. In this case, the bass frequencies are output only from the front speakers. LFE (Low Frequency Effect) level ­"LFE Level"­ Low frequency effect signal is used exclusively for giving the field effect of bass tone in the Dolby Digital and DTS signal. · Subwoofer Remix cannot be setup if the Subwoofer is set to "SUBW Off" or the Front speakers are set to "FRNT Normal". 1 Select "LFE Level". [SETUP] [MULTI CONTROL 2/3] [ENTER] 2 Set the LFE level. Use [MULTI CONTROL /5] to select the LFE level. [ENTER] The level is adjusted from 0dB to -10dB in1dB step decrements. 38 KRF-V9300D/KRF-V8300D/KRF-V7300D Input assignment ­"Assignment"­ The input source for the signal output at the CD (ASSIGNABLE) terminal can be assigned: CD, VIDEO1 or AUX. 1 Select "Assignment". [SETUP] [MULTI CONTROL 2/3] [ENTER] Setup 2 Select the input source to be assigned. Use [MULTI CONTROL /5] to select the input. [ENTER] Display "OPT1 CD" "OPT1 VIDEO1" "OPT1 AUX" Setting Assign CD as the input source Assign VIDEO1 as the input source Assign AUX as the input source Audio delay ­"Audio Delay"­ If the monitored video is delayed in time with respect to the audio from the speakers, the audio output timing can be delayed. 1 Select "Audio Delay". [SETUP] [MULTI CONTROL 2/3] [ENTER] 2 Set the delay time. Use [MULTI CONTROL /5] to select the delay time. [ENTER] The delay time is adjusted from 0ms to 300ms in 10ms step. English 39 HDMI setup The HDMI setup is required to use the component connected to the HDMI terminal or to use the HDMI control functions. If you do not use the HDMI connection, disable the HDMI input setup. (See <HDMI input setup ­"HDMI Input"­>. ) HDMI setup ­"HDMI Setup"­ The HDMI control functions can be set. 1 Enter the HDMI Setup mode. [SETUP] Use [MULTI CONTROL 2/3] to select "HDMI Setup". SETUP ENTER Setup MULTI CONTROL /// [ENTER] 2 Select an item to set. [MULTI CONTROL 2/3] [ENTER] Display "Audio Out" "Audio Delay" "HDMI Link" "Power CTRL"*1 Setting Sets the HDMI audio output destination. Adjusts the deviation in time between the output audio and video. Sets whether or not the HDMI control functions are used. Interlocks power ON-OFF of components by means of HDMI control. Allows the TV to control this unit including the volume levels from the speakers. Returns to Setup Menu. HDMI input setup ­"HDMI Input"­ The HDMI inputs can be enable or disabled individually. [. . . ] 1. 3 V / 2. 2 k Tone control BASS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±9 dB (at 100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±9 dB (at 10 kHz) HDMI section HDMI input terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DVD, VIDEO 2 HDMI output terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MONITOR FM tuner section Tuning frequency range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87. 5 MHz ­ 108. 0 MHz AM tuner section Tuning frequency range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 kHz ­ 1, 602 kHz iPod section Maxmum current drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]