User manual KENWOOD KRF-V5300D

[. . . ] AUDIO VIDEO CONTROL CENTER KRF-V5300D INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands © B60-5738-00/00 (EW/XW) B60-5738-00_00. indd 1 08. 4. 23 11:38:46 AM Before applying power Caution : Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only Unpacking Unpack the unit carefully and make sure that all the accessories are present. FM indoor antenna (1) AM loop antenna (1) Information on Disposal of Old Electrical and Electronic Equipment (applicable for EU countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. [. . . ] When using the remote control unit: Use the Input source keys to select a source. The following input source keys are prepared on the remote control unit: • • • • • • • • Tuner (FM/AM broadcast reception) "CD/DVD" "MD/TAPE" "VIDEO1" "VIDEO2" "DVD/6CH" "AUX" "AV AUX" ∑ Start playback from the selected source. é Press [PURE AUDIO MODE]. • While in PURE AUDIO MODE, the listen mode is set to stereo. • The display will be turned off and PURE AUDIO MODE indicator lights up. PURE AUDIO MODE indicator PURE AUDIO MODE When using the main unit: Use [INPUT SELECTOR] to select a source. The input sources change as shown below with [INPUT SELECTOR]: 1 Tuner (FM/AM broadcast reception) 2 "CD/DVD" 3 "MD/TAPE" 4 "VIDEO1" 5 "VIDEO2" 6 "DVD/6CH" 7 "AUX" • "AV AUX" can be selected with [AV AUX]. PURE AUDIO MODE To cancel Press [PURE AUDIO MODE] again. • PURE AUDIO MODE is also cancelled when listen mode is changed. ∞ Notes: • When the input mode is "6CH INPT", the listen mode does not change. (<Selecting the input mode> )) • During PURE AUDIO MODE, no video signal is output. • When the PURE AUDIO MODE is canceled, the listen mode remains in stereo if the input signal is digital. ∑ Start playback from the selected source. é Use [VOLUME %/fi] to adjust the volume. English 21 B60-5738-00_00. indd 21 08. 4. 23 11:39:12 AM Normal Playback Adjusting the sound One-touch low frequency emphasis (Bass Boost) (remote control only) You can adjust the sound quality when this unit is in the PCM stereo and analog stereo modes. Press [BASS BOOST]. MULTI CONTROL ACTIVE EQ ACTIVE EQ BASS BOOST TONE MULTI CONTROL / • Press the key once to select the maximum (+10) low frequency emphasis setting. • TONE will automatically be turned ON. • This key does not function when this unit is in the sound quality or ambience effects adjustment mode. • When the ACTIVE EQ mode is set to ON, set it to OFF and then control the BASS BOOST setting. To cancel Press [BASS BOOST] again. Muting the sound (remote control only) MUTE Press [MUTE] to mute the sound of the speakers. "MUTE" indicator blinks. Adjusting the Tone (remote control only) You can adjust the sound quality when this unit is in the PCM stereo and analog stereo mode. To cancel Press [MUTE] again so that the "MUTE" indicator goes off. • MUTE can also be deactivated by adjusting volume. œ Press [TONE] to select the Tone mode. ∑ Use [MULTI CONTROL 5/∞] to select "TONE ON" or "TONE OFF". ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode. é When in "TONE ON" selection, press [TONE] for the following displays. Display "BASS" "TREB" Setting Adjusts low frequency range. Range -10 – +10 (in 2 step) -10 – +10 (in 2 step) Press [ACTIVE EQ] for the following selections; Display "ACTIVE EQ MUSIC" "ACTIVE EQ CINEMA" "ACTIVE EQ GAME" "ACTIVE EQ OFF" Setting Effective when listening to music. Active EQ function is off. ® Use [MULTI CONTROL 5/∞] to adjust the sound quality. • ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON and during 96kHz LPCM playback. ACTIVE EQ indicator lights up. • When the ACTIVE EQ mode is set to ON, set it to OFF and then control the TONE setting. ACTIVE EQ † Press [TONE]. 22 KRF-V5300D B60-5738-00_00. indd 22 08. 4. 23 11:39:14 AM Ambience effects Surround modes This unit is equipped with listen modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand. See <Speaker settings> ^. Dolby Digital Dolby Digital is a highly sophisticated and versatile audio encoding/decoding technology. Dolby Digital technology can transmit mono, stereo (two-channel), or up to 5. 1-channel surround sound (discrete* multichannel audio). In 5. 1-channel surround sound, the three front channels (Left/Center/Right) deliver crisp, clean dialogue and accurate placement of on-screen sounds, while twin surround channels (Left Surround/Right Surround) wrap around the audience and immerse them in the action. The LFE (Low-Frequency Effects) channel delivers real impact for explosions and other effects that can, literally, be felt as well as heard. The superior coding efficiency of Dolby Digital-and its ability to deliver high-quality discrete multichannel audio without compromising video quality has made it the designated audio standard for DVD worldwide. * The sound information contained in each of the six available channels is distinct and independent. These six channels are described as a "5. 1-channel" system, because there are five full-bandwidth channels with 3 Hz to 20 kHz frequency range for Front Left and Right, Center, and Surround, plus one "Low Frequency Effects" (LFE) subwoofer channel devoted to frequencies from 3 to 120 Hz. The below speaker placements are for 5. 1 channel surround sound system which are; • • • • • Dolby Digital Dolby Pro Logic II DTS DSP mode DVD 6-channel TV / SCREEN L SW C R Dolby Pro Logic II Dolby® Pro Logic® II technology processes any high quality stereo (two-channel) movie and music audio into five playback channels of full-bandwidth surround sound. A matrix surround decoding technology, Dolby Pro Logic II detects the directional cues that occur naturally in stereo content and uses these elements to create a five-channel surround sound playback experience. [. . . ] 550 mV / 470 Ω PRE OUT (SUBWOOFER) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 5 V / 1. 5 kΩ Tone control BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 10 kHz) VIDEO section VIDEO inputs / impedance VIDEO (composite) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p / 75 Ω VIDEO outputs / impedance VIDEO (composite) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p / 75 Ω COMPONENT VIDEO inputs/ impedance (For Australia) COMPONENT VIDEO (Y-signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p / 75 Ω COMPONENT VIDEO (CB/ CR-signal) . . . . . . . . . . . . . . . 0. 7 Vp-p / 75 Ω COMPONENT VIDEO outputs/ impedance (For Australia) COMPONENT VIDEO (Y-signal) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p / 75 Ω COMPONENT VIDEO (CB/ CR-signal) . . . . . . . . . . . . . . . 0. 7 Vp-p / 75 Ω FM tuner section Tuning frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]