User manual KENWOOD KRF-V7773D

[. . . ] VR-4090/VR-4080 KRF-V7773D This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. B60-4487-10 01 CH (K, P, T, M, X, Y) OC 9911 Connecting and Setting Up Your New Kenwood Audio-Video Receiver Welcome to the Connection and Setup Guide for your new Kenwood Audio-Video Receiver. VR-4090/VR-4080 is sold in USA and Canada. The VR-4090/VR-4080/KRF-V7773D offers 3 kinds of 5. 1channel digital decoding: · · Dolby® Digital, for the hundreds of currently available Dolby Digital DVDs and LaserDiscs. [. . . ] 1Video1 : 2Video2 : 3Video3 : 4Video4 : 5DVD/6ch : 6AV AUX : Using the numeric keys: When entering a figure directly for selecting a CD track number, etc. , press the numeric keys as shown below. To enter 5 To enter 25 : : or : 2 If a video device which is connected to an input is not identified by Remote Control unit, the device name is skipped and not displayed. (VR-4080/KF-V7773D only) Although VIDEO4 is displayed in the initial status, the receiver cannot be switched to select VIDEO4. The VIDEO4 display will not appear after the Remote Control unit has been set up. The LCD screen shows TV if this is registered in and identified by Remote Control unit. Adjusting the receiver's volume: Press the VOL (+/-) key repeatedly until the desired volume is obtained. Muting audio temporarily: Press the MUTE key. To resume the original volume, press the MUTE key again or press one of the VOL (+/-) keys. Screen menu control operation 2WAY LCD REMOTE CONTROL UNIT REC 01. IR 02. Surround 03. Contrast Home Enter Remote Setup LCD Function key 1 LCD Function key 2 35 VOL. VOL. + - The contents of the function keys vary according to current situations, and the function names (Next, Back, Enter, etc. ) are shown on the screen. For details, see the description of each control operation. Press to select an item by scrolling the screen menu up or down. The selected item is displayed in an inverted color. Chapter Two : Setting Up the Remote Control Unit Setting Up Speakers Before you can begin using the receiver to control your home entertainment system, you must set up Remote Control unit to operate your speakers effectively. There are three areas of speaker setup: · · · SP Selection SP Level SP Distance 2. Press the Setup key (LCD function key 2). When the front (left and right) speaker setting menu (Front) appears, select Front Normal or Large in the same way as step 4, then press the Next key. (If you set the subwoofer to Off in step 4, skip this step. ) 6. When the center speaker setting menu (Center) appears, select Center Normal, Large or Off in the same way as step 4, then press the Next key. Select Off when no center speaker is connected. "Large" cannot be selected here. ) 7. When the surround (left and right) speaker setting menu (Surround) appears, select Surround Normal, Large or Off in the same way as step 4, then press the Next key. Select Off when no surround speaker is connected. "Large" cannot be selected here) · Select Normal if the speaker is not capable of producing clean, deep bass energy at output levels that match those produced by a typical powered subwoofer. All bass below 80Hz in that channel is removed from that speaker and is sent to the subwoofer in all listening modes. [. . . ] 32 MD recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 setup codes for components . . . . . . . . . . . . . . . . . . . 39 tape deck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 system control chaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]