User manual KENWOOD KRF-V8070D

[. . . ] ENGLISH AUDIO VIDEO SURROUND RECEIVER KRF-V8070D INSTRUCTION MANUAL KENWOOD CORPORATION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. FRANÇAIS DEUTSCH ITALIANO ESPAÑOL B60-5348-10 01 MA (E) 0209 Before applying the power Units are designed for operation as follows. [. . . ] (The SPEAKER EQ indicator lights up. ) 4 SPEAKER EQ OFF : The SPEAKER EQ function is turned OFF. (The SPEAKER EQ indicator goes off. ) • “SPEAKER EQ” will scroll from right to left. • SPEAKER EQ cannot be turned OFF when ACTIVE EQ is turned ON. • SPEAKER EQ function will not be available when REC MODE, AUTO TUNING, PRESET MEMORY or DTS-ES MATRIX is ON, and during 96kHz LPCM playback. 1 SPEAKER EQ SMALL Listening with headphones 1 Press the A and B Speaker keys so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off. ENGLISH SP A LFE B MUTE CLIP SL S SB SR • If you turn off all of the speakers when in surround mode, the surround mode will be cancelled as well, resulting in stereo playback. 2 Connect headphones to the PHONES jack. PHONES 3 Use the VOLUME CONTROL knob or VOL +/– keys to adjust the volume. 23 EN Recording Recording audio (analog sources) 3 Press and hold the DIMMER key for more than 2 seconds to select the AUTO REC or MANUAL REC mode. 1 REC MODE off : The digital input record mode is switched off. 2 AUTO REC mode : The digital input signals (DTS, Dolby Digital, or PCM) are identified automatically and converted into stereo signals that are ready for recording. 3 MANUAL REC mode : The input signal type at the moment this mode is selected is held throughout this mode. For AUTO REC mode : SP L C SW R LFE A B MUTE CLIP DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED ENGLISH MD/TAPE Recording a music source 1 Use the Input Selector keys to select the source (other than “MD/ TAPE”) you want to record. 2 Set the MD or TAPE recorder to record. COAXIAL SL S SB SR 3 Start playback, then start recording. Recording video 1 Use the Input selector keys to select the video source (other than “VIDEO 1”) you want to record. 2 Set the video deck connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. • Recording may not be normal for some video software. This is due to the copy guard condition. y SP L C SW R LFE A B MUTE CLIP COAXIAL DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED SL S SB SR For MANUAL REC mode : SP L C SW R LFE A B MUTE CLIP DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. [. . . ] 1. 3 µV (75 Ω)/ 13. 2 dBf (40 kHz dev, S/N 26 dB) STEREO . . . . . . . . . . . 45 µV (75 Ω)/ 42. 1 dBf (40 + 6 kHz dev, S/N 46 dB) Total harmonic distortion MONO (1 kHz, 40 kHz dev) . . . . . . . . . . . . . . . . . . . . . . . 0. 2% (65. 2 dBf input) STEREO (1 kHz, 40 + 6 kHz dev) . . . . . . . . . . . . . . . 0. 8% (65. 2 dBf input) Signal to noise ratio (DIN weighted at 1 kHz) MONO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]