User manual KENWOOD LS-K1000

[. . . ] Model LS-K1000 Serial number Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. contact your local authority for details in locating a recycle facility nearest to you. [. . . ] Caution : Read this item carefully to keep your safety. Suffocation - After taking the unit out of the polyethylene bag, be sure to dispose of the polyethylene bag out of the reach of children. Otherwise, they may play with the bag, which could cause hazard of suffocation. Also avoid installing the unit in a place subject to dampness. Heat - Do not install the unit near a source of heat, such as radiators, or under direct sunlight. Modification - Do not attempt to open or modify the unit, for this could cause fire hazard or malfunction. Cleaning - Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. Abnormal smell - If an abnormal smell or smoke is detected, immediately turn the power OFF and unplug the appliance from the wall outlet. If color is distorted, turn the TV off for 15 to 30 minutes, then turn it back on and check again. (This allows the TV's degaussing circuitry to correct for the magnetic field from the speakers. ) If distortion is still present, move the speakers further from the TV. â· If there is a source of magnetism, including a magnet, is located in the proximity, its interaction with the speaker may produce color irregularities on the TV screen. Due to induction by electromagnetic waves generated from the TV set, the speakers may generate noise even when the power switch of the stereo system is set to OFF. Each speaker of this speaker system can be connected to either the left or right output channel of the amplifier. The speaker wire can also be connected to the speaker by using banana plugs which are commercially available in audio stores. To use the banana plug connection, tighten the screws on the speaker terminals before inserting the banana plug. [. . . ] To use the banana plug connection, tighten the screws on the speaker terminals before inserting the banana plug. Be sure to turn off your amplifier before connecting or disconnecting speakers. Maintenance of the unit When the speaker cabinets get dirty, wipe with a soft, dry cloth. [. . . ]