User manual KENWOOD LZ-702IR

[. . . ] Using a fuse with the wrong rating may cause your unit to malfunction. If you use the wrong screws, you could damage the unit. If you experience problems during installation, consult your Kenwood dealer. When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. [. . . ] If you make no operation for 15 seconds, this mode is automatically canceled. You can adjust the picture quality and Auto dimmer control of the monitor. Each time the button is pressed for at least 1 second, the AV output switches as follows: Display "AV-IN1" "AV-IN2" "Off" Setting Select the AV1 INPUT source. The reference for the Menu items and their setting content is after this operation explanation. You can continue by returning to step 2 and setting other items. You can select "Surround" and "Frequency" when <IR HEADPHONE> is not set to "Off". If you make no operation for 15 seconds, this mode is automatically canceled. You can select the IR Headphones audio you wish. When you cancel this function, press the [3] button. To prevent short circuits, remove the key from the ignition and disconnect the · Make the proper input and output cable connections for each unit. Connect the wiring harness wires in the following order: ground, ignition. This product is intended for use with 12V DC negative ground power only. Do not connect it to any other power supply. To prevent shorting, disconnect the battery cable from the negative terminal of the battery during installation. Be sure to firmly stabilise this product. Do not install it in a location which is not stable. Follow the installation and wiring procedures described in this manual. Improper wiring or modified installation can not only result in malfunction or damage to the unit but may also result in an accident. If your car's ignition does not come with an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source that receives a constant voltage supply, as with battery wires, the battery may die. [. . . ] 5 A Consumed Power : 14 W Operational temperature range : ­10 °C to +60 °C Storage temperature range : ­30 °C to +85 °C Dimensions (W × H × D) Monitor unit : 177 × 122 × 34 mm 7 × 4-7/8 × 1-5/16 inch Hideaway unit : 143 × 37 × 99 mm 5-5/8 × 1-7/16 × 4-7/8 inch Weight Monitor unit : 440 g (1. 1 Vp-p/ 75 External audio input level (RCA jacks) : 1 V/ 55 K Video output level (RCA jacks) : 1 ± 0. Although the effective pixels for the liquid crystal panel is given as 99. 01% of pixels may not light or may light incorrectly. [. . . ]