User manual KENWOOD M-74

[. . . ] Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. [. . . ] Press and hold SEARCH/TUNING 4 or ¢ [4 or ¢ search +/­] button for more than 2 seconds. Press the FWD PLAY 6 [6] button when the desired passage is located. To select a track/ file Press SEARCH/TUNING 4 or ¢ [4 or ¢ search +/­] button in play or pause mode. To select a album Press P. CALL/ALBUM 5 or [p. call/ (For audio file only) album up or down] button in play or pause mode. Removing a disc 1 2 1 2 3 Press [0] button, grasp the disc by its edges, and carefully pull it out. Press [0] button to close the CD tray. Inserting a USB device Press the mode. [ ] button to select standby Insert a USB device to the USB connector on the front panel. Press CD/USB [CD/USB] button to select USB mode. Press the CD/USB [CD/USB] button in the CD mode. The total album number and total file number will appear on the display. / · For audio file; "DIR:xxx TRK:xxx" appears on the display. "DIR: xxx" indicates album number and "TRK:xxx" indicates the file number. · The digit buttons, 0­9 on the remote control unit can also be used to select a track/file. ALL" and the icon "PGM" appear on the display. · Only for CD: If you press the INTRO button during programmed playback, the first 10 seconds of every track/file in the program will be played in sequence. The icon "INTRO" and the icon "PGM" appear on the display. / · If the unit finds an appropriate file, the route name and the file name will be scrolled on the display. Then the album number and track number will be displayed. · If there is no appropriate file, "NO FILE" is displayed. To clear the program Press 7 [7 stop] button once in stop mode, and twice during program playback. The icon "PGM" disappears from the display. Programming tracks/files Programming tracks/files of a CD/audio file is possible when playback is stopped. Up to 60 tracks can be stored in the memory in any order. / · "P" represents PROGRAM. · The program is automatically cleared as soon as the CD tray is opened. · The function of program setting cannot be used in PLAY/ PAUSE mode. 1 In stop mode, press P. MODE button to enter program setting. The icon "PGM" and "­ ­ P­01"/ "­ ­ ­ P­01" appears on the display. "­ ­" indicates track number of the CD. [. . . ] · Use a cotton swab slight moistened with cleaning fluid. · You also can clean the heads by playing a cleaning tape once. Caution on condensation Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours and restart the operation after the condensation has dried up. [. . . ]