User manual KENWOOD NX-300

[. . . ] The use of the warning symbol means the equipment is subject to restrictions of use in certain countries. This equipment requires a licence and is intended for use in the countries as below. Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. [. . . ] If the battery's protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or Do not charge the battery near fires or under direct sunlight!If the battery's protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or Use only the specified charger and observe charging requirements!Temperature over the regulated value, excessive high voltage or current over regulated value, or with a remodelled charger), it may overcharge or an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into Do not pierce the battery with any object, strike it with an instrument, or step on it!This may break or deform the battery, causing a short-circuit. The battery may generate heat or smoke, rupture, or burst into Do not jar or throw the battery!An impact may cause the battery to leak, generate heat protection circuit is damaged, the battery may charge at an abnormal current (or voltage), and an abnormal chemical reaction may occur. Do not use the battery pack if it is damaged in any way!The battery may generate heat or smoke, rupture, or burst into Do not solder directly onto the battery!If the insulator is melted or the gas release vent or safety function is damaged, the battery may generate heat or smoke, Do not reverse the battery polarity (and terminals)!When charging a reversed battery, an abnormal chemical reaction may occur. In some cases, an unexpected large If the battery pack does not smoothly connect with a charger or operating equipment, do not force it; check the polarity of the battery. If the battery pack is reverse-connected to the charger, it will be reverse-charged and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into Do not touch a ruptured and leaking battery!If the electrolyte liquid from the battery gets into your eyes, wash your eyes out with fresh water as soon as possible, without rubbing your eyes. If left untreated, it may cause eye-problems. Do not charge the battery for longer than the specified time!Do not place the battery pack into a microwave or high pressure container!The battery may generate heat or smoke, rupture, or burst into Keep ruptured and leaking battery packs away from fire!If the battery pack emits a bad odor, appears to have different coloring, is deformed, or seems abnormal for any other reason, remove it from the charger or operating equipment and do not use it. [. . . ] If the Keypad Auto PTT function has been enabled by your dealer, you do not need to press the PTT you can make the call simply pressing the DTMF keys. Alternatively, you can enter digits by using . Ask your dealer for the length of time necessary to hold this Your dealer can set the transceiver to emit tones and received operation. Quiet Talk (QT)/ Digital Quiet Talk (DQT) Your dealer may have programmed QT or DQT signaling on Operator Selectable Tone (OST) (NX-200/ NX-300 Only) OST, you can 1 2 3 4 5 Select your desired channel. [. . . ]