User manual KENWOOD NXR-700E QUICK START GUIDE

[. . . ] This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form. Do not expose the unit to rain or moisture; to prevent fire or electric shock. Do not open the unit under any circumstances; to avoid risk of electric shock. [. . . ] Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems) Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign "Pb" below the symbol for batteries indicates that this battery contains lead. The use of the warning symbol means the equipment is subject to restrictions of use in certain countries. This equipment requires a licence and is intended for use in the countries as below. (NXDN mode) r Programmable Function keys Press these keys to activate their programmable functions. T COM jack Connect to the PC using a RS-232C standard DB9 (Female) cross cable. Y VOLUME control Turn clockwise until a click sounds, to unmute the audio. While blinking, the repeater cannot be used. 0 BUSY indicator Lights green while a signal is being received. 1 OCXO indicator The OCXO indicator shows the state of the reference 0 MHz oscillator : Lights Green when using a reference signal from an optional OCXO unit (KXK-3). Lights Orange when using a reference signal from another repeater. Lights red when no reference signal is available or when an error occurs. Does not light when the reference signal is an internal VCXO signal. 2 CTRL indicator The CTRL indicator shows the control channel status while using Digital trunking : Lights Green when the repeater is used as control channel. R SYNC 1 / 2 jack Connect to another repeater to use synchronous frame signaling for digital trunking. [. . . ] 2 Press the microphone PTT switch, then speak in your normal speaking voice. The TX indicator lights red while transmitting. 3 When you finish speaking, release the PTT switch. When power is applied to the unit, the POWER indicator lights green. [. . . ]