User manual KENWOOD R-K1000

[. . . ] STEREO INTEGRATED AMPLIFIER/TUNER R-K1000 INSTRUCTION MANUAL Decla Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands © B60-5712-00/00 (EW/XW) BT Safety Precautions Before Applying Power Caution: Read this page carefully to ensure safe operation. Units are designed for operation as follows. Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only Safety precautions WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. [. . . ] 32 · Adjusting the External Component Input Level . . . . . . . . . . . . . . . 33 D. AUDIO · Playback from a Digital Audio Player . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 · Adjusting the Digital Audio Player Input Level . . . . . . . . . . . . . . . 36 English 25 Receiving Broadcast Stations This section explains how to listen to the FM/AM radio and set radio stations. Listening to FM/AM Radio Simply pressing the [TUNER/BAND] key turns on the system and allows you to listen to the radio. 1 ClearA SLEEP TIMER DISPLAY DIMMER Press the [TUNER/BAND] key to select "FM" or "AM". Each time you press the key, the band switches between "FM" and "AM". MODE FLAT TONE ROOM EQ MODE SOUND PRESET 2 Select a station. Choosing from stored stations (Preset Call) Select a station that you have stored. ENTER TUNING P. CALL AUTO / MONO VOL See P. 28, 29 for more information on presets. MUTE TUNER BAND D. AUDIO CD Selection with the [P. CALL] keys Each time you press the [G] or [H] key ( ) or the [B] or [A] key ), the tuning changes to the next stored station in sequence. ( AUX PHONO TAPE D-IN1 D-IN2 D-IN3 RANDOM REPEAT P. MODE CLEAR RC-R0830E ) or the [B] or [A] key When you hold down the [G] or [H] key ( ), the tuning changes to the next stored station in sequence at intervals ( of approximately 0. 5 seconds. 26 R-K1000 Receiving Broadcast Stations Related Information Presetting Stations Automatically (AUTO MEMORY) R P. 28 Presetting Stations Manually (Manual Preset) R P. 29 Audio Settings R P. 37 onwards Choosing from stations that are not stored (Auto/Manual tuning) 1 Select Auto tuning or Manual tuning. Press the [AUTO/MONO] key. The mode changes as shown below each time you press the key. AUTO lit ClearA AUTO unlit Manual tuning (Select this mode when reception is poor. ) SLEEP TIMER DISPLAY DIMMER Auto tuning (Select this mode when reception is good. ) MODE FLAT TONE ROOM EQ MODE SOUND PRESET 2 Select a station. Press the TUNING [I]/[J] key. When the station is tuned, "TUNED" lights up on the display. If you are receiving a stereo signal, "ST. " also lights up. ENTER TUNING P. CALL AUTO / MONO VOL TUNER BAND D. AUDIO CD MUTE Using Auto tuning The radio automatically tunes in to the next station each time you press the key. Repeat this step until you are tuned in to your preferred station. AUX PHONO TAPE D-IN1 D-IN2 D-IN3 Using Manual tuning RANDOM REPEAT P. MODE CLEAR RC-R0830E Press the key until the desired station is tuned or until you reach the desired frequency. There is no sound while Auto/Manual tuning is in progress. Auto tuning provides stereo reception while manual tuning provides monaural reception. The display changes as shown below each time you press the [DISPLAY] key. R Day/Clock AM or when the program service name is not stored: Preset No. R "NO PS" R Day/Clock (non-RDS) English 27 Receiving Broadcast Stations Presetting Stations Automatically (AUTO MEMORY) Up to 40 stations can be preset in the system. For use of the RDS function, stations must be memorized by AUTO MEMORY. 1 ClearA SLEEP TIMER DISPLAY DIMMER Press the [MODE] key. MODE 2 Select "AUTO MEMORY". Press the [A] or [B] key. "AUTO MEMORY" flashes on the display and the receivable radio stations are preset automatically. A preset frequency can be rewritten later. FLAT TONE ROOM EQ MODE SOUND PRESET ENTER TUNING P. CALL AUTO / MONO VOL Press the [ENTER] key. MUTE TUNER BAND D. AUDIO CD AUX PHONO TAPE D-IN1 D-IN2 D-IN3 RANDOM REPEAT P. MODE CLEAR RDS stations are given priority during auto presetting. If there is memory left after presetting, this unit continues presetting regular FM and AM stations. A broadcast station that cannot be preset with AUTO MEMORY should be set with Manual preset. 29) Auto Memory setup may take a few minutes to complete. RC-R0830E 28 R-K1000 Receiving Broadcast Stations FM/AM Broadcast Statins Related Information Presetting Stations Manually (Manual Preset) 1 Select a desired station. Receive a station with either Auto Tuning or Manual Tuning. (P. 27) To memorize an RDS station, wait for the station name to appear on the display before carrying out step 2. ClearA SLEEP TIMER DISPLAY DIMMER 2 Press the [ENTER] key. The preset number flashes. MODE FLAT TONE ROOM EQ MODE SOUND PRESET ENTER TUNING P. CALL AUTO / MONO VOL TUNER BAND D. AUDIO CD MUTE 3 CLEAR Select the desired preset number (P01 to P40). Selection with the [P. CALL] keys Press the [G] or [H] key. The selected preset number is displayed. AUX PHONO TAPE D-IN1 D-IN2 D-IN3 RANDOM REPEAT P. MODE RC-R0830E If the selected preset number already stores a station, the existing station will be overwritten by the newly selected station. 4 Press the [ENTER] key. To preset other stations, repeat steps 1 to 4 for each of them. English 29 RDS (Radio Data System) This system is designed for RDS reception, it can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. Select the FM band. Preset RDS stations with the AUTO MEMORY function. (P. 28) PS (Program Service) Name Display ClearA When an RDS broadcast is received, the station name is automatically displayed. TIMER DISPLAY DIMMER SLEEP MODE The "RDS" lights up when an RDS broadcast (signal) is received. TONE ROOM EQ MODE SOUND PRESET FLAT ENTER To switch the displays TUNING Press the [DISPLAY] key. AUTO / MONO VOL P. CALL The mode changes as shown below each time you press the key. TUNER BAND D. AUDIO CD MUTE AUX PHONO TAPE PS (Program Service Name) CLEAR Preset Number Day/Clock D-IN1 D-IN2 D-IN3 RANDOM REPEAT P. MODE RC-R0830E Some stations may not be provided or be given different names depending on countries or areas. 30 R-K1000 RDS (Radio Data System) Searching for a Desired Program Type (PTY Search) The tuner automatically searches for a station which is currently broadcasting a specified program type (genre). 1 ClearA SLEEP TIMER DISPLAY DIMMER Press the [PTY] key. When an RDS broadcast is received, the program type is shown on the display. [. . . ] Use the procedure below to reset the microcomputer. 1Unplug the power cord from the AC wall outlet. 2Plug the power cord back in while holding down the power [K] key on the main unit. 3When the microcomputer is reset, the display shown on the right appears. Bear in mind that resetting erases any stored information and restores the system's default settings. English 65 Care and Storage Care and storage of main unit Do not place in the following locations Place exposed to direct sunlight. Place subjected to excessive humidity or dirt. [. . . ]