User manual KENWOOD SJ400

[. . . ] Young children should be supervised to ensure they do not play with the appliance. Caution: Do not operate the kettle on an inclined surface. Only use the powerbase supplied and keep it clean and dry. Make sure the lid is secure before switching the kettle on. [. . . ] 4 Your kettle will boil and switch off automatically. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the metal and plastic surfaces. the inside Wipe with bicarbonate of soda on a damp cloth. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. Note: G For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). G If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable pug is inadvertently inserted into a 13A socket outlet. G G G This kettle complies with European Economic Community Directive 89/336/EEC. before using for the first time Remove all packaging and any labels. Fill to `MAX', boil, then pour the water away. Repeat 2 to 3 times. the scale filter 1 Open the lid. 2 Remove the scale filter by holding the tab and then lifting the filter out. 3 either rinse under the tap or use a soft brush or when descaling your kettle, drop the filter in too. Then slide the filter down into the bracket until secure . G G descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. Please note: not descaling your kettle may invalidate your guarantee. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. [. . . ] Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood customer care on 023 9239 2333. [. . . ]