User manual KENWOOD SJ480

[. . . ] Young children should be supervised to ensure they do not play with the appliance. Caution: Do not operate the kettle on an inclined surface. Only use the powerbase supplied and keep it clean and dry. Make sure the lid is secure before switching the kettle on. [. . . ] G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. G the scale filter 1 Open the lid. 3 either rinse under the tap or use a soft brush. or when descaling your kettle, drop the filter in too. descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. Please note: not descaling your kettle may invalidate your guarantee. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. After descaling, boil with fresh water several times and discard. Clean any descaler off the kettle - it can damage the parts. G Some regions of the country have chalky water. This makes boiled water look cloudy and leaves a deposit on the side of the kettle. This is normal but can be removed with regular cleaning. G Alternatively, to reduce limescale build up, use filtered water to fill your kettle. G A range of Kenwood jug water filters are available. Call Kenwood on 023 92392333 and ask for customer care. G boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off and let it cool down before re-filling. When it has cooled down, the switch will reset itself. care and cleaning Before cleaning, unplug your kettle and let it cool down. G to use your stainless steel kettle 1 Fill the kettle through either the spout or lid. [. . . ] Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood customer care on 023 9239 2333. [. . . ]