User manual KENWOOD SJ680

[. . . ] Young children should be supervised to ensure they do not play with the appliance. Caution: Do not operate the kettle on an inclined surface. Only use the powerbase supplied and keep it clean and dry. Make sure the lid is secure before switching the kettle on. [. . . ] To open the lid press press the lid release . The water level must be between `Max' and 200 mls (1 cup) G Be economical: do not boil more water than you need. G To improve the quality of your drinks always use fresh water. 2 Close the lid by pushing down on the finger pad area . 4 Your kettle will boil and switch off automatically. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. G care and cleaning Before cleaning, unplug your kettle and let it cool down. G the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the metal and plastic surfaces. the inside Wipe with bicarbonate of soda on a damp cloth. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. G G G G the scale filter 1 Open the lid. 3 either rinse under the tap or use a soft brush. or when descaling your kettle, drop the filter in too. 4 Slide the filter back in to refit. G G G know your Kenwood stainless steel kettle finger pad flip top lid lid release & on/off switch lid release on/off switch water level window 360° powerbase scale filter cord wrap boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off and let it cool down before re-filling. When it has cooled down, the switch will reset itself. descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. G the flat element may be damaged. Please note: not descaling your kettle may invalidate your guarantee. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. After descaling, boil with fresh water several times and discard. [. . . ] Keep children away from the kitchen work area. For baby's bath, run the cold water first, then add the hot. Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. [. . . ]