User manual KENWOOD SJ900

[. . . ] Caution: Do not operate the kettle on an inclined surface. Only use the powerbase supplied and keep it clean and dry. Make sure the lid is secure before switching the kettle on. Warning: Do not remove the lid while the water is boiling. [. . . ] To shorten the cord turn the handle on the underside of the powerbase clockwise. Fill to `MAX', boil, then pour the water away. Repeat 2 to 3 times. If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. Your kettle is fitted with a scale filter to hold back limescale particles. If you find drops of water under your kettle, don't worry - it is just condensation. boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off and let it cool down before re-filling. When it has cooled down, the switch will reset itself. toknow your Kenwood jug kettle lid scale filter water level gauges on/off switch with neon 360° powerbase cord winder handle care and cleaning Before cleaning, unplug your kettle and let it cool down. to use your jug kettle 1 Fill the kettle through the lid. The water level must be between 'Max' and 200ml (1 cup). Always use the filter and never overfill - boiling water may splash out. Be economical: do not boil more water than you need. To improve the quality of your drinks always use fresh water. 4 Your kettle will boil and switch off automatically. To re-boil, wait a few seconds - the on/off switch needs time to reset. the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the metal and plastic surfaces. the inside Wipe with bicarbonate of soda on a damp cloth. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. the scale filter 1 Remove the lid. 3 either rinse under the tap or use a soft brush or when descaling your kettle, drop the filter in too. 4 Slide the filter back in to refit . descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: problems may be experienced with the kettle switching on and off during use or switching off before boiling. Please note: not descaling your kettle may invalidate your guarantee. [. . . ] Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood Customer Care on 023 9239 2333. [. . . ]