User manual KENWOOD SJ908A

[. . . ] This kettle complies with European Economic Community Directive 89/336/EEC. before using for the first time Remove all packaging and any labels. Adjust the length of the cord - pull the cord out of the base to lengthen. To shorten the cord turn the handle on the underside of the powerbase clockwise. [. . . ] Remove the kettle from the base before filling or pouring. Never put the kettle near or on cooker hot plates or gas burners. This kettle is for domestic use only. know your Kenwood jug kettle lid scale filter water level gauges on/off switch with neon 360° powerbase cord winder handle G G boil-dry protection If you switch on with too little water, your kettle will cut out automatically. Switch off and let it cool down before re-filling. When it has cooled down, the switch will reset itself. G care and cleaning Before cleaning, unplug your kettle and let it cool down. G to use your jug kettle 1 Fill the kettle through the lid. The water level must be between 'Max' and 200ml (1 cup). G Always use the filter and never overfill - boiling water may splash out. G Be economical: do not boil more water than you need. G To improve the quality of your drinks always use fresh water. 4 Your kettle will boil and switch off automatically. To re-boil, wait a few seconds - the on/off switch needs time to reset. G If you experience problems with your kettle switching on and off during use or switching off before boiling, check that the flat element is free from scale - see "descaling". If descaling does not solve the problem contact Kenwood customer care. G Your kettle is fitted with a scale filter to hold back limescale particles. G If you find drops of water under your kettle, don't worry - it is just condensation. G G the outside and powerbase Wipe with a damp cloth, then dry. Do not use abrasives - they will scratch the metal and plastic surfaces. the inside Wipe with bicarbonate of soda on a damp cloth. Even though your kettle comes with a scale filter, you still need to clean the inside (and the filter) regularly. G G G G G the scale filter 1 Remove the lid. 3 either rinse under the tap or use a soft brush or when descaling your kettle, drop the filter in too. 4 Replace the filter by locating the front of the filter into the spout area and then clip into place . G G G descaling Regular descaling of the flat element will improve the performance of your kettle. If the kettle is not descaled regularly the build up of limescale may result in the following: G problems may be experienced with the kettle switching on and off during use or switching off before boiling. Please note: not descaling your kettle may invalidate your guarantee. [. . . ] Mix well and test the temperature with your elbow before you put baby in. run cold water over a burn immediately, then get medical help. Don't stop to remove clothing. If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. UK If you need help with: using your kettle servicing or repairs (in or out of guarantee) call Kenwood Customer Care on 023 9239 2333. [. . . ]