User manual KENWOOD SLG-7

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only China. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V only *Other countries . . . . . . . . . . . AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. The mains plug contains a fuse. [. . . ] (Except for TAPE input) Press the desired key. TUNER BAND TUNER BAND CD01 0:02 TAPE TAPE 4 The input source component to be recorded should be displayed. MD/DVD VIDEO/6ch IN ÷ If a disc has already been loaded when the CD input is selected, it starts to play automatically. In this case, press the 7 (stop) key to stop it. ÷ When you select VIDEO/6ch IN (SLG-7 only) or MD/DVD (NV-301 only) to record the external input, adjust the input level. Start recording. SET 1 Start recording. 2 Play (or tune) the input source to be recorded. 5 Lights REC · L R SW ÷ If a disc has already been loaded when the CD input is selected, it will starts recording automatically. ÷ Recording stops automatically when the tape side(s) to be recorded have been fully recorded. ÷ Press the stop (7) key of the cassette deck unit to stop recording (see the next page). Basic section (SW channel lights for SLG-7 only) To pause recording (Main unit only) Lights SET REC L R SW (SW channel lights for SLG-7 only) ÷ Pressing the SET (¶) key pauses recording after leaving a non-recorded space of about 4 seconds. ÷ If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. 36 Let's record Tips in CD recording When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the same time as the CD starts to be played (synchronous recording function). 1 Set the CD player in pause mode. 2 Select the track to be recorded with the MULTI CONTROL (4, ¢) keys. (The CD player pauses at the beginning of the selected track. ) 3 Put the cassette deck in record-pause mode. (Press the SET (¶) key twice in succession. ) 4 Start playing the CD. ÷ The repeat mode can also be canceled by pressing the 7 (stop) key. Special playback options for CD 41 Random playback As the titles are selected randomly each time, the music can be enjoyed of it. Random playback can play tracks in one to three discs. Please note that random playback is not possible during programmed playback. If the PGM indicator is lit in the display, perform the procedure on page 38 to cancel the program playback mode. Select the "CD" input. Press the key repeatedly to switch the display. 1 "One Disc Random" Random play of one disc 2 "All Discs Random" Random play of all discs 3 "Random off" (Normal playback) Random play of one disc +"One Disc Random" is scrolled in the display 1 Select the RANDOM mode. (For "One Disc Random" playback, select the disc in advance. ) (Remote control unit only) RANDOM One Disc Ran RANDOM D1 RNDM T04 Random play of all discs +"All Discs Random" is scrolled in the display DISC To select another track in the middle of playing one NV-301 DISC SKIP MULTI CONTROL P. CALL All Discs Ra D1 RNDM T04 RANDOM SLG-7 DISC SKIP MULTI CONTROL P. CALL ALL AUTO BACK ÷ Playback stops after each title has been played once. Application section ÷ Pressing the 4 key once returns to the beginning of the track being played. To repeat random playback Select "One Disc Random Repeat". (Remote control unit only) REPEAT RANDOM REPEAT To cancel random playback Select "Random off". (Remote control unit only) RANDOM Goes out RANDOM Each press switches the modes as follows. 1 "One Disc Random Repeat" (Random repeat mode) 2 "One Disc Random" (Repeat canceled) ÷ The displayed character information returns to the normal display and normal playback in the order of the track numbers starts from the track being played. 42 R. D. S. and Europe) RDS is a system which transmits useful information (digital data) for FM broadcasts together with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions such as automatic display of the station name. Set the reception band to FM. Preset RDS stations with the auto memory function. ¤ This unit is equipped with the following functions utilizing RDS data: PTY (Program TYpe) Search : e The tuner automatically searches for a station which is currently broadcasting a specified program type (genre). The "RDS" indicator lights up when an RDS broadcast (signal) is received. RDS PS (Program Service) Display : (See below. ) When an RDS broadcast is received, the station name is automatically displayed. ÷ Some functions may not be provided or be given different names depending on countries or areas. Note before the use of RDS For reception of RDS stations, the auto presetting function must be used to preset the stations. With the auto memory function, RDS stations are preset with priority. To switch the display contents Pressing the RDS DISP. Display mode priority When an RDS broadcast is received : 1PS (Program Service) Display : When an RDS broadcast is received, the station name is automatically displayed. [. . . ] 120 mm (5 in. ), paper cone type Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 mm (2 in. ), paper cone type Passive radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 mm (5 in. ) Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Peak input level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]