User manual KENWOOD TK-90

[. . . ] Thank you for choosing KENWOOD for your radio telecommunication applications. We believe this easy-to-use transceiver will provide dependable communications to keep vehicles and personnel operating at peak efficiency. kENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. [. . . ] Scan Resume controls when the transceiver continues scanning after stopping due on a busy channel. â· Time-Operated Scan: After stopping on a busy channel, Scan resumes after a predetermined time (set by your dealer) whether or not the signal is still present on the channel. Carrier-Operated Scan: The transceiver remains on the busy channel until the signal ends. Scan resumes after a predetermined time (set by your dealer) after the signal has dropped out. A Selective Call, or Selcall, is a voice call to a particular station or group of stations. 3 After you have finished your call, release the PTT switch. Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the # key or the key programmed as Monitor. If your dealer has programmed your transceiver with a list of stations, you can manually select a station to send a selcall. Your dealer can program up to 4 special keys so that you can quickly and easily make a selcall to a specific station. Press the key programmed as Direct Call 1 to Direct Call 4 to send a selcall to the stations programmed onto those keys. â· While making the call, the icon flashes. When the call is complete, the icon remains on the display. â· Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the # key or the key programmed as Monitor. 1 While in Selcall Mode, press the key programmed as Selcall to view the Selcall list. 2 Press the CH and keys to select the ID of the station you want to call. Alternatively, you can press the key to page the selected station, rather than making a voice call. While making the call, the When a Selcall is received, an alert tone will sound and the calling station's ID (or name) will appear on the display. To respond to the call, press the PTT switch and speak into the microphone. â· Depending on the Auto Reset time set up by your dealer, your speaker will mute if no reponse is received. You can unmute the speaker to remain in standby mode by pressing the # key or the key programmed as Monitor. [. . . ] To play back a recorded voice memo: 1 Press the key programmed as Playback 1 to 4 to play back the specified voice memo. 2 Press the key and speak into the microphone to begin recording your message. 3 Press the key to end the recording at any time and store it into the transceiver memory. 2 Press the key to end the playback at any time. [. . . ]