User manual KENWOOD TT330

[. . . ] Never cover your toaster with a plate or anything else - it could overheat and catch fire. For the same reason, never completely cover the warming rack. When using the warming rack, never wrap the food up. [. . . ] WARNING: THIS APPLIANCE MUST BE EARTHED. Note: For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service). If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable pug is inadvertently inserted into a 13A socket outlet. This toaster complies with European Economic Community Directive 89/336/EEC. before using for the first time Remove all packaging and any labels. Wrap excess cord around the cord storage device on the underside of the toaster . Operate the toaster once on setting 3 without bread. (The lever will not stay down unless the toaster is plugged in). As with all new heating elements, your toaster may emit a slight burning smell when it is first switched on. This is normal and not a cause for concern. To stop toasting at any stage, press the `cancel' button. To raise it higher, lift the lever. G hints on using your toaster G G key removable warming rack lever (with 'Hi-RiseTM' for extra lift) browning control `cancel' button with indicator light `defrost' button with indicator light `reheat' button with indicator light crumb tray cord storage G G G Select a lower setting for light browning, for toasting one slice only or for dry bread. Dry/stale bread toasts more quickly than fresh bread and thinly sliced bread toasts more quickly than thickly sliced bread. Therefore the browning control should be set at a lower setting than usual. For best results ensure that the bread slices are of an even thickness, freshness and size. In order to achieve uniform browning we recommend you wait a minimum of 30 seconds between each toasting so that the control can automatically reset. Alternatively select a lower setting when additional toasting is carried out. to use your toaster 1 Set the browning control. [. . . ] 3 Wipe the outside of the toaster with a damp cloth, then dry. G G G G G G service G If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. If you need help with: using your toaster or servicing or repairs (in or out of guarantee) call Kenwood on 023 92392333 and ask for Customer Care. Have your model number ready - it's on the underside of your toaster. [. . . ]