User manual KENWOOD VR-8050

[. . . ] VR-8050 KENWOOD CORPORATION About the supplied remote control AUDIO VIDEO SURROUND RECEIVER INSTRUCTION MANUAL Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. For the U. S. A. Register Online Register your Kenwood Home Audio product at www. kenwoodusa. com Plus opt in to receive e-mail updates and other offers when you register at our web site. B60-5458-00 00 MA (K, P) 0401 Before applying the power Units are designed for operation as follows. [. . . ] 3 Use the MULTI CONTROL knob or Multi (%/fi) keys to select TONE ON/OFF. SP L C LFE R AB MUTE CLIP DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS COAXIAL ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED L C LFE R Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. SP AB MUTE CLIP COAXIAL OPTICAL 6CH INPUT AUTO DETECT CIN AC DS ANALOG 96kHzfs SL S SB SR Blinks To cancel Press the MUTE key again so that the "MUTE" indicator goes off. · MUTE ON can also be deactivated by turning the VOLUME CONTROL knob or pressing VOL +/­ keys. SL S SB SR 4 When in TONE ON selection, press the TONE key for the following displays. BASS : Select this to adjust the low frequency range. TREBLE : Select this to adjust the high frequency range. 5 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the sound quality. SP L C LFE R AB MUTE CLIP COAXIAL DTS. DOLBY DIGITAL STEREO OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. MATRIX DSP MODE DISCRETE PRO LOGIC LOUDNESS ANALOG 96kHzfs NEO:6 CSII THX Surround EX RDS RTY AUTO MEMO STEREO TUNED SL S SB SR · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. · The adjustment item is displayed for approximately 20 seconds. 21 EN Normal playback ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON. Press the ACTIVE EQ key for the following selections; 1 ACTIVE EQ MUSIC : Effective when listening to music. (The ACTIVE EQ indicator lights up. ) 2 ACTIVE EQ CINEMA : Effective when watching a movie. (The ACTIVE EQ indicator lights up. ) 3 ACTIVE EQ TV : Effective when watching TV. (The ACTIVE EQ indicator lights up. ) 4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF. (The ACTIVE EQ indicator goes off. ) Listening with headphones 1 Press the A and B Speaker keys so that the speaker indicator goes off. Make sure the SPEAKERS indicators are turned off. SP L LFE R AB MUTE CLIP OPTICAL 6CH INPUT AUTO DETECT CINEMA EQ. DSP MODE D ANALOG 96kHzfs COAXIAL SL S SB SR · If you turn off all of the speakers when in surround mode, the surround mode will be canceled as well, resulting in stereo playback. 2 Connect headphones to the PHONES jack. PHONES · "ACTIVE EQ" will scroll from right to left. · ACTIVE EQ function will not be available when REC MODE, AUTO TUNING or PRESET MEMORY is ON. SPEAKER EQ mode SPEAKER EQ function is to adjust the receiver's audio output characteristics with the speakers' characteristics which differs depending on the size of the speakers. Especially for the music sound source playback, the reproduced sound becomes more natural when adjusting the output characteristics. When activating the SPEAKER EQ function, you will be able to enjoy a more natural and dynamic sound experience even with small size speakers. [. . . ] 28 µV (75 )/ 40. 2 dBf Total harmonic distortion MONO (1 kHz, 75 kHz dev) . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 5% (65 dBf input) STEREO (1 kHz, 67. 5 + 6. 75 kHz dev) . . . . . . . . . 0. 7% (65 dBf input) Signal to noise ratio MONO (1 kHz, 75 kHz dev) . . . . . . . . . . . . . . . . . . . . . . . . 75 dB (65 dBf input) STEREO (1 kHz, 67. 5 + 6. 75 kHz dev) . . . . . . . [. . . ]