User manual KENWOOD VR-9050

[. . . ] AUDIO VIDEO SURROUND RECEIVER VR-9050 INSTRUCTION MANUAL KENWOOD CORPORATION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control unit to control other KENWOOD DVD players. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). Using the remote control without completely understanding its design and how to switch the operation modes may result in incorrect operations. For the U. S. A. Register Online Register your Kenwood Home Audio product at www. kenwoodusa. com Plus opt in to receive e-mail updates and other offers when you register at our web site. B60-5534-00 00 CS (K, P) 0412 Before applying the power Units are designed for operation as follows. [. . . ] Adjust the input level. SP L C LFE R AB MUTE CLIP You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo mode. 1 Press the TONE key to select the TONE mode. 2 Use the MULTI CONTROL knob or MULTI %/fi keys to select TONE ON/OFF. SP L MUTE CLIP STEREO SL S SB SR AB 1 Use the Input Selector keys to select the source of which the input level you want to adjust. · You can store a separate input level for each input source. 2 Press the SOUND and / keys or MULTI @/# keys repeatedly until the "INPUT" indication appears. 3 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the input level. SP L C LFE R AB MUTE CLIP DOLBY PL II x C LFE R SL S SB SR 3 When in TONE ON selection, press the TONE key for the following displays. BASS : Select this to adjust the low frequency range. TREBLE : Select this to adjust the high frequency range. 4 Use the MULTI CONTROL knob or MULTI %/fi keys to adjust the sound quality. SP L C LFE R AB MUTE CLIP STEREO SL S SB SR SL S SB SR · The adjustment mode is displayed for approximately 20 seconds. · The input level may be adjusted to any one of three settings: 0dB, -3dB, and -6dB. (The initial setting is 0dB. ) 4 Press the SOUND key again to return to the input indication. · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. · The adjustment item is displayed for approximately 20 seconds. · This function is available only for speakers connected to FRONT A terminals. Adjusting the LOUDNESS mode You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when the receiver is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the LOUDNESS setting ON. · This function is available only for speakers connected to FRONT A terminals. To cancel Press the LOUDNESS key again so that the "LOUDNESS" indicator goes off. 21 EN Normal playback One-touch low frequency emphasis (BASS BOOST) You can adjust the sound quality when the receiver is in the PCM stereo and analog stereo modes. · Press the key once to select the maximum (+10) low frequency emphasis setting. · This key does not function when the receiver is in the sound quality or ambience effects adjustment mode. · This function is available only for speakers connected to FRONT A terminals. Recording Recording audio (analog sources) Switching back to the previous setting Press the BASS BOOST key again. Input Selector keys Muting the sound The MUTE key lets you mute the sound of the speakers. Blinks SP L C LFE R AB MUTE CLIP Input Selector keys SL S SB SR To cancel Press the MUTE key again so that the "MUTE" indicator goes off. · MUTE ON can also be deactivated by turning the VOLUME CONTROL knob or pressing VOLUME %/fi keys. Recording a music source 1 Use the Input Selector keys to select the source (other than "MD/ TAPE") you want to record. 2 Set the MD or TAPE recorder to record. ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON. [. . . ] 1. 3 µV (75 )/ 13. 2 dBf (75 kHz dev, SINAD 30 dB) 50 dB quieting sensitivity STEREO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 µV (75 )/ 40. 2 dBf (75 kHz dev) Total harmonic distortion MONO (1 kHz, 75 kHz dev) . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 5% (65 dBf input) STEREO (1 kHz, 67. 5 + 6. 75 kHz dev) . . . . . . . . . 0. 7% (65 dBf input) Signal to noise ratio MONO (1 kHz, 75 kHz dev) . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]