User manual KENWOOD VR-906

[. . . ] AUDIO VIDEO SURROUND RECEIVER VR-906 VR-905 KRF-V6090D KRF-V5090D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control Compared to standard remote controls, the remote control supplied with this model has several operation modes. These modes enable the remote control to control other KENWOOD DVD players. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc. ). [. . . ] (The initial setting is 0dB. ) 4 Press the SOUND key again to return to the input indication. 18 EN Normal playback Listening to a source component VOLUME CONTROL INPUT SELECTOR Adjusting the sound SPEAKERS ON/OFF ACTIVE EQ VOLUME CONTROL Input Selector PHONES MULTI CONTROL MUTE VOLUME %/fi ACTIVE EQ TONE MULTI CONTROL VOLUME %/fi MUTE LOUDNESS BASS BOOST 1 Use the INPUT SELECTOR knob or Input Selector keys to select the source you want to listen to. The input sources change as shown below: 1 2 3 4 5 6 7 "TUNER" "CD/DVD" "TAPE" or "MD" "VIDEO1" "VIDEO2" "DVD/6CH" (VR-906/VR-905 : "DVD") "AUX" Adjusting the Tone (remote control only) You can adjust the sound quality when this model is in the PCM stereo and analog stereo mode. 1 Press the TONE key to select the Tone mode. 2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to select TONE ON/OFF. 2 Start playback from the selected source. 3 Use the VOLUME CONTROL knob or VOLUME %/fi keys to adjust the volume. 3 When in TONE ON selection, press the TONE key for the following displays. BASS : Select this to adjust the low frequency range. TREB : Select this to adjust the high frequency range. 4 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys to adjust the sound quality. · The bass and treble levels are adjustable from -10 to +10 in 2 step increments. One-touch low frequency emphasis (Bass Boost) (remote control only) You can adjust the sound quality when this model is in the PCM stereo and analog stereo modes. · Press the key once to select the maximum (+10) low frequency emphasis setting. · TONE will automatically be turned ON. · This key does not function when this model is in the sound quality or ambience effects adjustment mode. £~· Switching back to the previous setting Press the BASS BOOST key again. 19 EN Normal playback Recording Recording audio (analog sources) Adjusting the Loudness mode (remote control only) You can adjust the Loudness function which controls the low volume settings to maintain the music's richness. The adjustment can be made when this model is in the PCM stereo and analog stereo mode. Press the LOUDNESS key to turn the Loudness setting ON. To cancel Press the LOUDNESS key again so that the "LOUDNESS" indicator goes off. INPUT SELECTOR Muting the sound The MUTE key lets you mute the sound of the speakers. Press the MUTE key. Recording a music source 1 Use the INPUT SELECTOR knob to select the source (other than "MD/TAPE") you want to record. 2 Set the MD or TAPE recorder to record. To cancel Press the MUTE key again so that the "MUTE" indicator goes off. · MUTE ON can also be deactivated by turning the volume control knob. 3 Start playback, then start recording. Recording video 1 Use the INPUT SELECTOR knob to select the video source (other than "VIDEO1") you want to record. 2 Set the video deck connected to VIDEO 1 to record. · Select the REC mode to record a digital input source. · Recording may not be normal for some video software. This is due to the copy guard condition. º ACTIVE EQ mode You can enjoy a more impressive sound effect when ACTIVE EQ is turned ON during Dolby Digital and DTS playback and, when in PCM and analog stereo mode. Press the ACTIVE EQ key for the following selections; 1 ACTIVE EQ MUSIC : Effective when listening to music. [. . . ] 1. 5 V / 2. 2 k Tone control BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10 dB (at 10 kHz) Loudness control VOLUME at -30dB level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +8 dB (at 100 Hz) AM tuner section Tuning frequency range 10 kHz step (VR-906-VR-905) . . . . . . . . . . . . . . . . . . . . . [. . . ]