User manual KENWOOD WF990

[. . . ] Discard any unused filtered water after 24 hours. The filter is for treating mains tap water only. [. . . ] Do not use abrasive cleaners. 30 rt sta key 30 day cartridge life indicator lid release flip top lid cartridge hopper release lever hopper with spout cover jug G G G x2 G start G G sta rt ´ 30 rt sta sta rt 30 G to use your water filter 1 Remove wrapper and immerse the cartridge in cold water. Gently agitate the cartridge until the air bubbles cease and leave to soak for 10 minutes . 2 Open the flip top lid and insert the cartridge into the hopper and press gently to seal. 3 Fill the hopper from the tap and allow the water to filter. 4 To set the cartridge life indicator press and hold the button until (30) appears on the display . 5 The display will countdown automatically. When the display reaches `05' the display will start flashing until it reaches `00' to indicate that the cartridge should be changed . If the display is blank, repeat step 4. G G G G service G G star t 30 G G G 05 The cartridge life indicator is sealed for life. When the life indicator has reached the end of its useful life, please unclip and dispose of it separately according to local recycling recommendations for the disposal of batteries. Contact Customer Care for a replacement. If you need help with using your water filter (in or out of guarantee) call Kenwood Customer Care on 023 9239 2333. Please have your model number ready. G G 00 G Frequently asked questions? [. . . ] Activated carbon removes chlorine and some organic pollutants. Is filtered water suitable for Yes those on a low sodium diet? [. . . ]