User manual KENWOOD XD-980MD

[. . . ] COMPONENT SYSTEM/COMPACT HI-FI SYSTEM XD-980MD INSTRUCTION MANUAL KENWOOD CORPORATION COMPACT DIGITAL AUDIO B60-3000-00 SI AP (T) 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 4 3 2 1 2 Before applying power Units are designed for operation as follows. Caution : Read this page carefully to Before applying power ensure safe operation. XD-980MD (En) Europe and U. K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1. For replacement, use only a 13-Amp ASTA-approved (BS 1362) fuse. [. . . ] Selected tracks are recorded from several CDs to MD. Recording in the programmed sequence from CD to tape. Selected tracks are recorded from several CDs to tape. From 2 or more CDs From 2 or more CDs E Change of the track sequence according to the tape length (CD =TAPE only) (Time edit recording) Side A F Fade-out/Fade-in at the tape reversal (CD =TAPE only) (Fade edit recording) Side A W p The order of CD tracks are changed automatically so that no tune is interrupted at the end of tape sides A and B. (Up to 32 tracks) CD tracks are recorded in the order they are recorded. The tune interrupted at the end of tape side A is faded out and side B starts with fading in from the middle of that tune. Knowledge sections 1 2 3 5 1 2 3 4 8 7 6 4 7 6 5 4 Side B The tune interrupted in the middle at the end of tape side B is simply faded out. Side B 44 Convenient Recording Methods XD-980MD (En) One-touch recording of one CD, MD (one-touch edit recording of all tracks) All tracks of one CD or MD are recorded. Recording is possible to tape or MD from CD and to tape from MD. For recording to tape, please read "Let's record" in the operation manual of the cassette deck (option) carefully. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD). ´ Preparation section 1 Make the preparations for recording. CD =MD 1 Insert a recordable disc into the MD recorder. 3 Insert disc(s) in the CD player. MD =TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. 7 Adjust the recording level. CD =TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. 7 Adjust the recording level. * ) * Basic section 2 Start recording. CD =MD 1Select the target disc. CD player and MD recorder must be brought to stopped condition. MD =TAPE CD =TAPE 1 Select the target disc. DISC SELECTOR DISC SELECTOR DISC1 DISC2 DISC3 DISC1 DISC2 DISC3 Application section MD TAPE 2 Start recording. O. T. E. Press in stop mode. 2 Start recording. CD TAPE Press before playback of the CD starts. key is pressed after playback has started, only the track being played at that time will be recorded. t Press before playback of the CD starts. ÷ With recording onto tape, the track will be interrupted for the part of the guide tape at the tape reversal, where recording is not possible. Please use a different recording method if this is to be avoided. Note Knowledge sections To interrupt a recording CD =MD 7 MD =TAPE 7 CD =TAPE 7 ÷ Recording and playback will be stopped. Convenient Recording Methods XD-980MD (En) 45 When a desired track is found, only that track is recorded (One-touch edit recording of one track) While listening to a CD or MD, it is possible to record only the track being heard at that time from the beginning of that track. Recording is possible to tape or MD from CD and to tape from MD. For recording to tape, please read "Let's record" in the operation manual of the cassette deck (option) carefully. When equalizer, SRS 3D, or any other effect is applied to the sound, the sound with applied effect can be recorded (except for digital recording from CD to MD). ´ 1 Make the preparations for recording. CD =MD 1 Insert a recordable disc into the MD recorder. 3 Insert disc(s) in the CD player. Preparation section MD =TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. 7 Adjust the recording level. CD =TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. 7 Adjust the recording level. * ) * 2 Playback of a CD or MD. [. . . ] 87. 5 MHz ~ 108 MHz MW (AM) tuner section Tuning frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 531 kHz ~ 1, 602 kHz LW tuner section Tuning frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 kHz ~ 279 kHz [MD recorder section] System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minidisc digital audio system Recording method . . . . . . . . . . . . . . . . . . . . [. . . ]