User manual KENWOOD XD-DV502

[. . . ] AC 230 V only Caution : Read this section carefully to ensure safe operation. Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V only *Other countries . . . . . . . . . . . . . . . . . . . . AC 110-120 / 220-240 V switchable For the United Kingdom Factory fitted moulded mains plug 1. [. . . ] This varies depending on number of Title within the disc you're playing. Note Some discs only have one title. 2 2 2 Operations 3 Press the ENTER key. ("C__" or "Tr__" appears) ENTER 4 Use the 4 / ¢ keys or the numeric keys to enter the chapter or title number. DISC 1 1 DISC 2 2 DISC 3 3 DISC 2 2 DISC 3 3 P. CALL 4 ¢ KEY CONTROL 5 6 or 4 5 6 + 8 HIT MASTER 9 ­ 7 ECHO + 8 HIT MASTER 9 0 0 When you enter a one-digit chapter or title number, you may have to press ENTER on the remote after pressing the numeric key on the remote. Otherwise press 0 first and the other value. This varies depending on number of chapter or track within the disc you're playing. Note The Chapter feature won't work if the disc isn't formatted with separate chapters. 32 DVD Using the On-screen banner display XD-DV series (EN/K, M, T, X, Y) Changing the Audio Language DVD Changing the Subtitle Language If the disc was created with different language tracks, you can use the Banner Display to temporarily change the DVD player's Audio setting. You can change the Subtitle language while you're watching a disc (but only if the disc was created with subtitles). Using the on-screen banner display / Using the on-screen banner display / 1 During playback, press the OSD key on the remote. OSD 1 During playback, press key on the remote. OSD the OSD 2 Press the Cursor left/right (2/3) keys until the AUDIO icon is highlighted. / / 2 Press the Cursor left/right (2/3) keys until the SUBTITLE icon is highlighted. 2 2 2 3 Press the ENTER key. / / 3 Press the ENTER key. ENTER Operations ENTER The subtitle menu appears The audio menu appears 4 Select the audio language with press the ENTER key. ÷ The menu is switched off when no operation is performed for about 3 seconds. 4 Select the subtitle language with press the ENTER key. 5 Press the SUB TITLE ON/OFF key to sub title ON or OFF. ÷ The menu is switched off when no operation is performed for about 3 seconds. Using the AUDIO key on the remote / Using the SUB TITLE key on the remote 1 During playback, press the SHIFT key, then press the SUB TITLE key on the remote 2 Select the subtitle language with press the ENTER key or SUB TITLE key. 3 When the SUB TITLE ON/OFF key is pressed, subtitles will be displayed. Switching between display of subtitles and no display of subtitles is done each time the key is pressed. Displayed when SUB TITLE is ON 1 During playback, press the SHIFT key, then press the AUDIO key on the remote. AUDIO DISPLAY SHIFT 2 Select the audio language with press the ENTER key or AUDIO key. ÷ The menu is switched off when no operation is performed for about 3 seconds. The language feature only works if the disc was created with multiple audio tracks. When you chose an audio language from the Banner Display, you only override the audio language setting in the DVD Player's main menu (in the Language Preferences menu within Setup menu) temporarily. Notes 1. The subtitle feature only works if the disc was created with multiple audio tracks. 2 Displayed when SUB TITLE is ON Using the On-screen banner display XD-DV series (EN/K, M, T, X, Y) 33 DVD Changing the Camera angle CD VCD Using IntroScan function Some disc contains multiple angles particular scene or sequence. If the disc only has one angle, this feature won't work. IntroScan plays the first few seconds of each track on the CD similar to the scan feature that's on many car radios. Using the on-screen banner display / Using the on-screen banner display / 1 During playback, press the OSD key on the remote. OSD 1 During playback, press the OSD key on the remote. OSD / 2 2 2 3 Press the ENTER key. / / 3 Press the ENTER key. ENTER ENTER The ANGLE menu appears 4 Select the angle with press the ENTER key. ÷ The menu is switched off when no operation is performed for about 3 seconds. ÷ The first 10 seconds of each track play. ÷ After Intro Scan goes through all of the tracks, it stops. 3 close the door. ÷ Remove tape slack before loading. ÷ Close the door securely. / REVERSE MODE TAPE B TAPE B STOP STOP 23 23 7 4, ¢ 1 Select reveres mode MAIN UNIT REVERSE MODE Each press switches the modes as follows 1" " : The recording will end and the tape will stop at the end in reverse direction, no matter whether recording was started in forward direction or in reverse direction. " : In recording mode, this is the same as " ". " : Record stops after having recorded one side of tape. Select tape transport direction, Then 2 press the STOP ( 7 ) key. MAIN UNIT TAPE B 2" 3" REMOTE TAPE B 23 ÷ If the tape transport direction is opposite to the desired direction, press the play key corresponding to this. Tape direction indicators of currently selected deck. Operations 23 STOP STOP 7 3 Select the source to be recorded MAIN UNIT VIDEO/AUX ÷ Start playback the source, then press the REC/ARM key. REMOTE DVD/CD 6 TUNER BAND DVD/CD TUNER BAND 4 Start recording MAIN UNIT ONLY AUX Lit REC/ARM To pause recording MAIN UNIT ONLY To stop recording This flashes quickly during ARM and slowly during pause. MAIN UNIT REMOTE STOP STOP REC/ARM 7 ÷ Pressing the key pauses recording after leaving a nonrecorded space of about 4 seconds (ARM function). ÷ If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. CD Direct Recording (TAPE B only) XD-series (EN/T, M, X) 41 This unit can only use tape for the normal position (Type I). CD Direct recording is not possible for a DOLBY SURROUND disc. Please switch the listening mode to STEREO and perform normal recording. (See page 52) With CD Direct recording, an entire CD is recorded and CD and TAPE stop automatically. Preparation See "Preparation" on page 40. 1 Select reveres mode MAIN UNIT REVERSE MODE · Select "CD DIRECT RECORDING", then 5 press the SELECT key. MAIN UNIT TI UL M REMOTE L /P. CAL ROL NT CO 4 P. CALL 4 ¢ Select tape transport direction, Then 2 press the STOP ( 7 ) key. · MAIN UNIT TAPE B SELECT ¢ SELEC T REMOTE TAPE B 23 23 STOP STOP The following items can be selected by pressing the MULTI CONTROL keys or cursor keys on the remote. 7 Press 3 key. MENU) MAIN UNIT SMART MENU "CD DIRECT RECORDING" "TIMER RECORDIND" ÷ PUT TAPE IN DECK B" will be displayed when there is no tape in TAPE B. Please set a tape into TAPE B. Operations REMOTE S. MENU Select 6 SELECTdisc number, then press the key. MAIN UNIT TI UL M REMOTE L /P. CAL ROL NT CO 4 4 Select "RECORDING OPTION", then press the SELECT key. REMOTE TI UL M L /P. CAL ROL NT CO P. CALL 4 ¢ ¢ SELECT MAIN UNIT 4 EN TE R P. CALL 4 ¢ SELECT ¢ SELEC T 7 Press the ENTER key to stert recording. MAIN UNIT REMOTE EN TE ENTER R The following items can be selected by pressing the MULTI CONTROL keys. "RECORDING OPTION "TAPE DUBBING" "AUDIO OPTION" "CLOCK OPTION" 42 CD Program Recording (TAPE B only) XD-series (EN/T, M, X) This unit can only use tape for the normal position (Type I). [. . . ] Bass-reflex type (Magnetically shielded) Speaker configuration Woofer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 mm, cone type × 2 Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 mm, cone type × 2 Super Tweeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mm, Piezo type Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]