User manual KENWOOD XD-V626

[. . . ] The fuse cover must be refitted when replacing the fuse in the moulded plug. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach. A power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer. [. . . ] (Up to 32 tracks) CD tracks are recorded in the order they are recorded. The tune interrupted at the end of tape side A is faded out and side B starts with fading in from the middle of that tune. 1 2 3 5 1 2 3 4 8 7 6 4 7 6 5 4 Side B The tune interrupted in the middle at the end of tape side B is simply faded out. Side B 46 Convenient recording methods XD-V626 (En) One-touch recording of one CD, MD (One-touch edit recording of all tracks) All tracks of one CD or MD are recorded. Recording is possible to tape or MD from CD and to tape from MD. For recording to tape, please read "Let's record" in the operation manual of the cassette deck X-H9 (option) carefully. Preparation section 1 Make the preparations for recording. CD =MD 1 Insert a recordable disc into the MD recorder. 2 Select "CD" with the input selection key. 3 Insert disc(s) in the CD player. MD =TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. 5 Select "MD" with the input selection key. 7 Adjust the recording level. CD =TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. 5 Select "CD" with the input selection key. of title to be recorded first 0 0 1 @T W I N 3 Press the TWIN REC key. TITLE SEARCH MANU. REC PGM REPEAT TOTAL SINGLE REMAIN DIGITAL 1 2 0:0 0 Application section TWIN REC Lights ÷ The recording level will be adjusted automatically in approx. 60 seconds (variable depending on CD contents), after which recording starts. ÷ Measures are taken automatically so that no track is interrupted at the tape reversal. Short soundless portions may be inserted between the tracks on the MD because of this processing. To Interrupt a Recording Knowledge sections Recording and playback are stopped when the 7 key of the CD player is pressed. Notes 1. When the TWIN REC key is pressed while the CD player is playing, the playback will be stopped and CCRS setting (edit recording preparation) will begin. The automatic setting of the recording level for edit recording uses the portions of the set CD suitable for setting the recording level. If the deck is set for one-side recording("), the processing at the tape end is applied only to side A. Convenient recording methods XD-V626 (En) 49 Producing an MD or a tape collecting only the first titles (BEST HITS function) The first tracks of all set CDs will be recorded on MD or tape in sequence from tray 1 on. For recording to tape, please read "Let's record" in the operation manual of the cassette deck X-H9 (option) carefully. 1 Make the preparations for recording. CD=MD 1 Insert a recordable disc into the MD recorder. 2 Select "CD" with the input selection key. (Insert CDs in the order to be recorded from tray 1 on. ) Preparation section CD=TAPE 1 Load a tape. (two-side recording) 4 Select the Dolby NR mode. [. . . ] 3. 4 kg (7. 5 lb) In case of difficulty XD-V626 (En) MD recorder unit (DM-H5) Laser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Semiconductor laser Recording method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Field modulation overwrite method Audio compression . . . . . . . . . . . . . . . . . . . . . . . . . . . ATRAC (Adaptive TRansform Acoustic Coding) D/A conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]