Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual KERO 360. We hope that this KERO 360 user guide will be useful to you.
Lastmanuals help download the user guide KERO 360.
Detailed instructions for use are in the User's Guide.
[. . . ] Open the lid of the fuel tank compartment and remove the material which protected it during transport. Turn the combustion cylinder lever to the left and then half . Way to the right until the combustion cylinder is correctly positioned in the circular wick guide. [. . . ] Use a pump to fill the tank with liquid combùstible for mobile heater. Keep on filling until the level of fuel reaches Presence of Iiquid combustible for mobile heater will make move the reading on the gauge into the black. Close the tank securely, and wipe away any spills. Turn the tank over, so that the filler orifice is facing downwards, and carefully put it back into its place. When the level of fuel in the tank goes down, the fuel gauge will indicate this. The fuel in the tank will be completely used about three hours burning after the fuel gauge reached the halfway level. Make sure that the heater is standing on a level surface. If the heater is not level, the automatic shut-off device maybe prevented from working. The automatic shut-off device (in case of knocks) is ready to work Do not try again and" ventilate the room. The first time you use a wick, let it absorb liquid combustible for mobile heater for about one hour. Only use liquid combustible for mobile heater with the aromatics removed, with a flashpoint above 61 and free of any impurities, in order to ensure that your wick lasts for a long time. If you find that the wick ls abnormally hard, if it is blocked or burning is abnormal, have it replaced by a qualified specialist, for example, the supplier of your heater. Before you Iight the heater, check the following points: the combustion cylinder must be proprely positioned. Make it rotate pushing the lever from left to right and make sure it is correctly fitted. When you use the heater for the first time, odours may persist for a certain time after lighting. This is normal, as oil and protective grease in the heater have to be burnt off. [. . . ] Make always sure to visually check that the automatic shut-off device has operated proprely. When Iighting the heater again Precautions: After tuming off the heater, wait at least five minutes before lighting the heater again. If the combustion cylinder has not had time to cool down, Iighting the heater again may result in odours being given off. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KERO 360
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual KERO 360 will begin.
