User manual KETER APEX 8X6

[. . . ] The following tools are required for shed assembly: Remove all of the pieces from the two packages and spread them out on the ground. Clear area of stones Remove all plants, roots and other obstacles Rake the ground Make ground level using a long, flat object (e. ANTES DE INICIAR A MONTAGEM Please check all parts on the Assembly Parts list are correct before commencing Assembly Review all instructions before you begin, continue to refer to instructions during assembly. selecting and Preparing your Site: Choose your site carefully before beginning assembly, site surface needs to be level. [. . . ] Wear safety-goggles and always follow the manufacturer's instructions when using power tools. Wash shed with garden hose or a mild detergent solution. Using a stiff brush or abrasive cleaner could damage shed. The shed is for storage purposes only, and not intended to be used as living quarters. Heavy articles should not be leaned against the walls, as this may cause distortion. Although wind direction varies, it is an important factor when taking into account where to place your shed. Keep doors closed and locked to prevent wind damage. Heavy amounts of snow on roof can damage the shed making it unsafe to enter. 5 lb of snow per square foot / 75kg per m2 Note: due to product variability, assembled size may be slightly larger than listed dimensions Keter's storage buildings (the Product) are warranted to the original purchaser to be free from defects in material or workmanship for a period of 7 years from the original date of purchase. keter's renowned reputation for fine products is a result of its dedication and commitment to quality , design and innovation. In case a problem should occur, please address your claim to customer service either by phone or through our web site: www. Any use of the Product for purposes other than the storage of goods will void this limited product warranty. Commercial use, or use other than for personal or household purposes is not covered by the limited warranty. In addition, damage caused by: use of force, incorrect handling, inappropriate use, abuse, neglect, accidents, impact from foreign objects, vandalism, pollutants, set-up on an un-level foundation, alteration, painting, fading, assembly not in accordance with the User's Manual, or damage caused as a result of storage above the capacity limits of the Product, are not covered by this limited warranty. This limited warranty does not apply to damage resulting from 'acts of nature' such as, but not limited to: hail, storm, tornado, hurricane, blizzard, flood, fire effects. This warranty is void if structural parts and components not supplied by Keter are used. Keter shall not be liable for inconvenience, labor, loss of time, maintenance, removal or reinstallation of the Product or other incidental, special or consequential damages arising in relation to the purchase or use of the Product. Keter shall also not be liable for damage caused for any reason whatsoever to goods stored inside the Product. While every attempt is made to embody the highest degree of safety in all equipment, freedom from injury cannot be guaranteed. The user assumes all risk of injury resulting from the use of this Product. [. . . ] over 8 years of ownership to completion of the warranty , 20% of original purchase price. Taxes, shipping costs, inconvenience, loss of use, installation fees, incidental or consequential damages will not be covered in the adjustment. Keter reserves the right to discontinue or change any of its Products, including colors, without giving notice. Should a Product covered by this limited warranty be unavailable, Keter reserves the right to substitute a product that is of equal value according to Keter's sole discretion, or to refund a portion of the original price of the defective part reflective of its original contribution to the cost of the Product. [. . . ]