User manual KETTLER 4 SIDED FOLDING PLAYPEN

[. . . ] To ensure that the safety level is kept to the highest possible standard, determined by its construction, this product should be serviced regulary (once a year) by specialist retailers. Instruct persons using the equipment (in particular children) on possible sources of danger during exercising. Before beginning your program of exercise, consult your doctor to ensure that you are fit enough to use the equipment. Base your program of exercise on the advice given by your doctor. [. . . ] Incorrect or excessive exercise may damage your health!Any interference with parts of the product that are not described within the manual may cause damage, or endanger the person using this machine. Extensive repairs must only be carried out by KETTLER service staff or qualified personnel trained by KETTLER. Before using the equipment for exercise, check carefully to ensure that it has been correctly assembled. Before beginning your first training session, familiarize yourself From engineering and are absolutely safe. Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. Before use, always check all screws and plug-in connections as well as respective safety devices fit correctly. all electric appliances emit electromagnetic radiation when in operation. Please do not leave especially radiation-intensive appliances (e. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment. Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. To pull off the pedal arms remove cap and screw (A). [. . . ] Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. To pull off the pedal arms remove cap and screw (A). Grip the pedal arm tightly, and screw in an M12 bolt (not supplied) into the thread (B). After a few turns you may take off the pedal arm (C). [. . . ]