User manual KETTLER APOLLO

[. . . ] For this reason, worn or damaged parts should be replaced immediately and the equipment taken out of use until this has been done. in case of enquiry , please contact your KETTLER dealer. If the equipment is in regular use, check all its components thoroughly every 1­2 months. pay particular attention to the tightness of bolts and nuts. [. . . ] Ensure that your working area is free of possible sources of danger, for example don't leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!The equipment must be assembled with due care by an adult person. If in doubt call upon the help of a second person, if possible technically talented. The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed. The required tools are supplied with the equipment. Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced. For technical reasons, we reserve the right to carry out preliminary assembly work (e. For machines with rope systems: please ensure that all ropes are fixed correctly. This is especially important for latissimus bars. When ordering spare parts, always state the full article number, spare-partnumber, the quantity required and the S/N of the product (see handling). 4 Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible. Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc. ) is required, this should be clearly stated on the order by adding the words , , with fastening material". Waste Disposal KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites). [. . . ] Move the centre of gravity of the body by raising one arm slowly over the head. Should the swing not move from its resting position (position I) raise the second arm above the head, too. If the swing still does not move, insert the adjusting device (B) into the next hole upwards. Always ensure that the adjusting device is firmly locked in position before beginning to exercise. [. . . ]